Advertisement
4 Installing the Case
a
Insert plastic plugs vertically into installation holes.
Knock the plastic plugs into the w all completely w ith a
rubber mallet.
Screw
Plastic plug
(4 pcs)
(4 pcs)
5 Installing, Splicing Pigtail and Drop Cable
Connect pigtails to the adapters of the fiber distribution module.
Route the pigtails into the upper splicing trays 2 to 4 and coil pigtails according to the routing in the follow ing figure, then bind
the pigtails in the case using the velcro straps.
Insert screw s through the installation holes on the FAT,
align it w ith the plastic plugs, and then tighten the
screw s to fix the FAT.
Don't touch and break off the roots of other connectors.
Splicing tray 4
Splicing tray 3
Splicing tray 2
6
Advertisement
