Memory Upgrade - Asus 3DexPlorer GX2 User Manual

II. Hardware Installation

Memory Upgrade

The ASUS 3DexPlorer GX2 graphics card comes with a 2MB video memory con-
figuration. A SO-DIMM (Small-Outline, Dual-Inline Memory Module) socket is
available to upgrade the video memory to 4MB. Memory size of 3MB is not sup-
ported on this product. Specifications may change without notice.
Memory Specifications
• Standard 2MB onboard two 256K x 32 SGRAM chips
• Upgrade to 4MB by adding two 256K x 32 SGRAM chips on SO-DIMM
• 10ns or faster (9ns, 8ns, 7ns,...) memory required
Memory Installation
1. The memory module will fit in only one orienta-
tion as shown because the plastic safety tabs on
both ends of the socket require the notched ends
of the memory module.
2. Press the memory module firmly into place start-
ing from a 45-degree angle, making sure that all
the contacts are aligned with the socket.
3. With your fingertips, rock the memory module
into a horizontal position so that it clicks into
place. The support clips should snap.
4. To release the memory module, push both clips
outward and rock the module out of the clips.
NOTE: For greater reliability, make sure that all video memory are of the same
type and speed.
10
ASUS 3DexPlorer GX2 User's Manual