Auto Dry Cycle - Haier HDE5000AW User Manual And Installation Instructions

AUTO DRY CYCLE

HDE/HDG5000AW,CHDE/CHDG5000AW
1. Press the power On/Off button to power on the dryer.
2. Set the cycle select dial to required auto dry cycle. The signal, and dry levels
are preprogrammed. To change this setting:
• P e r s s the "Dry Level" button to select suitable drying level after powering on
the dryer. There are 3 options to choose from: More, Normal, or Less.
• P e r s s the "Signal" button, and the buzzer will sound upon end of cycle.
• After switching on, the dryer automatically sets buzzer at "Softer". The
user can choose from Louder, Softer, or OFF.
• Press the "Wrinkle Saver" button to select a suitable reserved drying
program.
• h T convenient feature helps keep wrinkles from setting when you cannot s i
unload the dryer at the end of a cycle. The dryer will stop and then
tumble for a brief period every few minutes. Press the wrinkle saver button
to activate. Stop the setting at any time by pressing the wrinkle saver
button or opening the dryer door. This feature will work for 1 hour after
the drying program is complete.
• Press the "Anti Bacterial" button.
• This function can be selected only in certain cycles. Here the heat temp is
raised to the highest dry level. This option can only be used with heavy,
bulky items, white and normal cycle.
NOTE: Do not use on delicate fabrics
• Press the "Damp Dry Signal" button.
• If activated the dryer will beep when the load is 80% dry. This will allow
you to remove light weight or other items that you may wish to iron.
• P e r s s Start/Pause button.
• When starting the machine, close the door first, then press this button.
• f I a pause is needed during drying, press this button. Pressing again will
resume operation.
English
34