Service Precautions - Pioneer BDP-170 Service Manual

1

2. SERVICE PRECAUTIONS

2.1 NOTES ON CABLE CONNECTION AND DRESSING
A
(1) After replacement of the MAIN BOARD Assy
or LOADER Assy, connect then dress the
cables, as shown in the photo.
(2) When the Wi-Fi 4-pin cable is disconnected,
be sure to reconnect the cable so that the
side on which the ferrite core is attached is
connected to the MAIN BOARD Assy.
B
(3) When the Wi-Fi 4-pin cable is to be replaced,
remove the ferrite core from the old cable
then attach it to the new cable at a place
approximately 30 mm away from the
connector, by wrapping the cable once
around the ferrite core.
C
D
E
F
4
1
2
BDP-170
2
3
MAIN BOARD ASSY
Ferrite Core
3
4
WiFi 4pin Cable
4