Page 1
Washer dryer WN44G200ES siemens-home.bsh-group.com/welcome Register your product online...
Page 2
Your new washer dryer Display rules : Warning! You have chosen a Siemens washer dryer. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
Intended use Cleaning and maintenance . . . 40 Intended use Appliance housing/control panel . . . 40 Drum ......40 This appliance is intended for private ■...
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility.
Page 7
Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
Page 9
Safety instructions If there is coal dust or flour in Warning ■ the air around the appliance, Risk of injury! this may cause an explosion. If you support your weight/sit ■ Make sure that the area on the appliance door when it around the appliance is kept is open, the appliance may clean when it is in operation.
Safety instructions Caution! Cleaning/Maintenance Material damage/damage to Warning the appliance Risk of death! If the amount of laundry in The appliance is powered by ■ the appliance exceeds its electricity. There is a risk of maximum load capacity, it electric shock if you come into may not be able to operate contact with live components.
Environmental protection Warning Environmental Risk of electric shock/material protection damage/damage to the appliance! P ackaging/used appliance If moisture penetrates the E n v i r o n m e n t a l p r o t e c t i o n appliance, this may cause it to Dispose of packaging in an short circuit.
Positioning and connecting Reduce the washing temperature for Positioning and lightly and normally soiled laundry. connecting At low temperatures, the appliance ■ consumes less energy. For light to S tandard accessories normal soiling, lower temperatures P o s i t i o n i n g a n d c o n n e c t i n g than indicated on the care label are Check the appliance for transport Note:...
Positioning and connecting Safety instructions Mains lead Bag: Warning Installation and operating ■ Risk of injury! instructions The appliance is very heavy. Customer Service location ■ ■ Be careful when lifting/transporting directory* the appliance. Warranty* ■ When the appliance is lifted by its Supplementary sheet for the ■...
Positioning and connecting Installation on a base or a To prevent transport damage from ■ occurring if the appliance is moved wooden joist floor at a later date, you must refit the transport locks before transporting Caution! the appliance. Damage to the appliance The appliance may "wander"...
Positioning and connecting a) Remove the mains cable from the Removing the support struts holders. Unscrew and remove all screws in the vertical transport struts. b) Remove the sleeves. Remove the transport struts. Fit the covers. Undo and remove the screws on the horizontal transport strut.
Positioning and connecting Hose and cable lengths Water inlet Connection on left side Warning Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve).
Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Connect the water supply hose to connection points. The screw the water tap (¾" = 26.4 mm) and to connection is under mains water the appliance: pressure.
Positioning and connecting Alignment Connection Drainage into a siphon Level the appliance using a spirit level. ■ The connection point must be Incorrect levelling may result in intense secured using a hose clamp with a noise, vibrations and "wandering". diameter of 24 - 40 mm (available from specialist dealers).
Positioning and connecting Electrical connection Before washing for the first time Warning The appliance was inspected thoroughly Risk of death! before leaving the factory. To remove There is a risk of electric shock if you any residual test water, run the algodón/ touch live components.
Page 20
Positioning and connecting Remove the hoses. a) Clip the mains cable securely in the holders. Empty the dispensers. Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers Leaking detergent/fabric softener can prevent the appliance from working correctly, e.g.
Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap...
Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 32 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 33 inicio/pausa+carga (Start/ Reload) button for starting, interrupting, (e.g.
Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting Ô ajuste secado (Drying ¾/»/Ø Display Setting Description Aim) Ž - 90° °C (Tempera- Temperature that ã manchas (Stains) Ì/ë/â/ì ture) can be set in °C s prelav.
Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■...
Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■...
Detergents and care products Notes Detergents and care Only use liquid detergents that are ■ products self-flowing Do not mix different liquid detergents ■ Do not mix detergent and fabric Y ou can protect your appliance and ■ softener D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the Do not use products which have correct detergents and care products.
Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max.
Page 28
Overview of programmes Programme/Type of laundry Options/Information eco 40-60 9,0 kg/6,0 kg Suitable for washing normally soiled cotton,linen and mixed fab- ric textiles, and drying it to be immediately stored in a cupboard. 400 - 1400 rpm Notes ã manchas (Stains), s prelav. (Pre- Textiles which are washable based on the laundry symbol ■...
Page 29
Overview of programmes Programme/Type of laundry Options/Information outdoor + impreg. (Outdoor/Waterproofing) 1,0 kg/1,0 kg Wash cycle followed by waterproofing of membrane-coated Ž - 40 °C weatherproof and outdoor clothing or water-resistant fabrics 400 - 800 rpm Notes ã manchas (Stains) Use special detergent that is suitable for machine washing;...
Page 30
Overview of programmes Programme/Type of laundry Options/Information lana/lãs (Wool) h 2,0 kg/1,0 kg Hand- or appliance-washable fabrics that are made of wool or Ž - 40 °C contain wool; 2 - 800 rpm particularly gentle wash programme to prevent laundry from shrinking, with longer pauses in the programme (during which the items rest in the water).
Overview of programmes Programme/Type of laundry Options/Information secar delicado (Gentle Dry) -/2,5 kg Single gentle dry programme for drying garments with lower temperature, - by selecting ¾ to achieve automatic cupboard+ dry result, - by selecting » to achieve automatic cupboard dry result, Ô...
Programme default settings B termin. (Ready in/Time Dry) Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Additional programme settings The drying process would proceed Additional programme followed washing process when the settings Ô ajuste secado (Drying Aim) activated. If you only need the individual drying progamme, you can select secar You can find possible additional N ote: intensivo (Intensive Dry), secar A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;...
Operating the appliance s prelav. (Prewash) Operating the Prewash for heavily soiled laundry. appliance Touch s prelav. (Prewash) to activate P reparing the appliance or deactivate it. O p e r a t i n g t h e a p p l i a n c e The appliance was tested before Put the detergent into dispenser I Note:...
Operating the appliance Select programme/switch on Notes Unfold and load presorted items the appliance ■ of laundry. Mix large and small items. Washing items of different If you have activated the Note: size distribute themselves better childproof lock, you must first deactivate during the spin cycle.
Page 36
Operating the appliance Filling the dispensers Measuring aid A* for liquid detergent *depending on the model Pull out the detergent drawer. Warning Position the measuring aid A for measuring the correct amount of liquid Eye / skin irritation! detergent: If the detergent drawer is opened Pull out the detergent drawer.
Operating the appliance Starting the programme Adding/removing laundry Touch and hold inicio/pausa+carga After starting the programme (only for (Start/Reload) button for 1~2 seconds, washing), you can add or remove then release the button. The programme laundry if necessary. starts and the appliance door is locked. Touch the inicio/pausa+carga (Start/ The finish-in time is shown in the display Reload) button.
Operating the appliance Cancel the programme If you do not take laundry out within ■ 15 mins after drying process finished, wrinkle guard process will For programmes washing at high start to prevent laundry getting temperatures: wrinkled. The process lasts about 30 Touch the inicio/pausa+carga minutes.
Appliance settings 4: Switching the drum care ■ Appliance settings information signal on/off. Y ou can change the following settings: Ž A p p l i a n c e s e t t i n g s Œ off The volume of the end signal.
Cleaning and maintenance Descaling Cleaning and Descaling should not be necessary if maintenance the detergent is measured out correctly. However, if it is required, follow the Warning manufacturer's instructions for the C l e a n i n g a n d m a i n t e n a n c e Risk of death! descaling agent.
Cleaning and maintenance Clean the detergent dispenser tray Drain pump is blocked and insert with water and a brush, and dry it. Clean the inside of the Turn the water tap off to prevent Note: housing as well. more water from flowing in and to ensure that it is drained via the pump.
Cleaning and maintenance Carefully unscrew the pump cover; The drain hose at the siphon residual water may leak out. is blocked Clean the interior, pump cover thread and pump housing. The Turn the programme selector to impeller in the drain pump must be Û...
Faults and what to do about them Clean the filters: Faults and what to do Disconnect the hose from the rear of about them the appliance. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g.
Faults and what to do about them Drain the water. ~ Page 41 Pull the emergency release downwards with a tool and release. The door can then be opened. Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ...
Faults and what to do about them Display Cause/Remedy E:35 There is water in the base trough, the appliance is leaking. Turn off the tap. Call alternating with customer services. -10 (Suitable for spe- cial models) H:95 No water detected in drying phase, may get bad drying result. alternating with ~ "Filter in the water supply is blocked"...
Page 46
Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched the inicio/pausa+carga (Start/Reload) button or ■ start. selected B termin. (Ready in/Time Dry)? Is the door closed? ■ Childproof lock activated? Deactivate childproof lock. ■...
Page 47
Faults and what to do about them Faults Cause/Remedy Repeated, intensive foam- Have you used too much detergent? Add less detergent in the next time you ing. run a wash cycle with the same load. Detergent/fabric softener There is too much detergent/fabric softener in the dispensers. Do not fill the drips off the seal and col- dispensers above the max.
Page 48
Faults and what to do about them Faults Cause/Remedy Fluff found on the laundry. Run the algodón/algodão (Cottons) Ž (cold) programme without laundry and detergent to remove fluff which have accumulated inside the drum during the previous drying cycle. Water inlet noise during The washer dryer uses water condensation technology, water is constantly the drying phase.
Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be...
Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512.
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth)
Page 52
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001515334* 9001515334 (0005)