Table of Contents
Advertisement
Chapter 1 Maintenance
1. Power off the server (POWER LED goes off)
2. Unplug the power cord of the server from the power outlet.
3. Disconnect all the cables from the server
4. Pack the server securely to protect from damage, shock, and vibration.
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use in "User's Guide".
•
Make sure to complete installation.
•
Do not get your fingers caught.
•
Avoid installing under extreme temperature conditions.
•
Note
If the server needs to be relocated/stored due to a change in the floor layout to
a great extent, contact your service representative.
•
If the server has hard disk drives, move the server while being careful not to
damage the drive.
•
When storing the server, monitor the environmental conditions of the storage
area (temperature: −10°C to 55°C, humidity: 20% to 80%). (No dew
condensation is permitted)
Make backup copies of important data stored in the hard disk drive.
Tips
Important
If this server and internal optional devices are suddenly moved from a cold
place to a warm place, condensation will occur and cause malfunctions and
failures when these are used in such state. Wait for a sufficient period of time
before using the server and other components in the operating environment.
•
Check and adjust the system clock before operating after relocating or storing
Note
the server.
•
If the system clock time is significantly delayed or advanced over time in spite
of adjustment, contact your sales representative.
Express5800/E120d-M Maintenance Guide
1. Transfer, Movement, and Disposal
CAUTION
15
Advertisement
Table of Contents
