Siemens SIMATIC S7-1500 Manual page 31

Article number
Operating modes
Time Based IO
Connection of IO-Link devices
Alarms
Diagnoses
Diagnostics indication LED
Potential separation channels
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Equipment Manual, 08/2022, A5E45488510-AB
IO-Link protocol 1.1
Cycle time, min.
Size of process data, input per port
Size of process data, input per module
Size of process data, output per port
Size of process data, output per module
Memory size for device parameter
Master backup
Configuration without S7-PCT
Cable length unshielded, max.
IO-Link
•
• DI
• DQ
– TIO IO-Link IN
– TIO IO-Link OUT
– TIO IO-Link IN/OUT
• Port type A
Port type B
•
Interrupts/diagnostics/status information
• Diagnostic alarm
• Monitoring the supply voltage
Wire-break
•
• Short-circuit
Group error
•
• Monitoring of the supply voltage (PWR-
LED)
• Channel status display
• for channel diagnostics
• for module diagnostics
Potential separation
• between the channels
• between the channels and backplane bus
Technical specifications
6ES7547-1JF00-0AB0
Yes
2 ms
33 byte; max.
240 byte; max.
32 byte; max.
240 byte; max.
2 kbyte; for each port
Yes
Yes
20 m
Yes
Yes
No
No
No
No
Yes
Yes; 24 V DC via external terminal
Yes; The port diagnosis is available in the IO-Link
mode only.
Yes
Yes
Yes
Yes
Yes; green LED
Yes; green LED
Yes; red LED
Yes; red LED
No
Yes
31