Panasonic EH-XS01 Operating Instructions Manual page 6

WARNING
►In case of an abnormality or malfunction
Immediately stop using and remove the power
plug if there is an abnormality or malfunction.
- Failure to do so may cause fire, electric shock, or
injury.
<Abnormality or malfunction cases>
• The cord is damaged
• The main unit is deformed or smells of burning.
- Immediately request inspection or repair at an
authorized service center.
►Power cord
Do not damage or modify, or forcefully bend,
pull, or twist the power cord.
Also, do not place anything heavy on or pinch
the cord.
- Doing so may cause electric shock or fire due to a
short circuit.
Do not allow pins or trash to adhere to the
power plug/the appliance plug.
- Doing so may cause electric shock or fire due to a
short circuit.
Do not use when the power cord is damaged or hot.
Never use the appliance if the power plug fits
loosely in a household outlet.
- Doing so may cause burns, electric shock, or fire
due to a short circuit.
6
PB017081 - EH-XS01 _(01EN)_11-14-18.indd 6
Do not use anything other than the supplied
power cord.
Also, do not use any other product with the
supplied power cord.
- Doing so may cause burns or fire due to a short circuit.
Do not use in a way exceeding the rating of the
household outlet or the wiring.
- Exceeding the rating by connecting too many
plugs to one household outlet may cause fire due
to overheating.
Do not plug or unplug the power plug and
appliance plug into household outlet and the
main unit with wet hands.
- Doing so may cause electric shock or injury.
When storing, do not wrap the power cord
around the main unit.
- Doing so may cause the wire in the power cord to
break with the load, and may cause burns, electric
shock, or fire due to a short circuit.
Always ensure the appliance is operated on an
electric power source matched to the rated
voltage indicated on the appliance.
Fully insert the power plug or the appliance plug.
- Failure to do so may cause fire, or electric shock.
Periodically clean to ensure dust does not
accumulate on the power plug or the appliance
plug.
- Failure to do so may cause fire due to insulation
failure caused by humidity.
Disconnect the power plug and wipe with a dry cloth.
2018/11/14 10:04:50