Table of Contents
Advertisement
4
4
Attach the water supply tank to the main unit.
Push the water supply tank into the main unit until it
clicks.
• Water is supplied to the main unit and the water in
the tank decreases when the water supply tank is
attached the main unit.
• If the water supply tank is repeatedly attached and
removed, water may begin to leak from the water
outlet.
How to use the steamer
1
1
Insert the appliance plug into the main unit.
2
2
Plug in the power plug into the household
outlet.
3
3
Open the lid all the way to the top.
10
PB017081 - EH-XS01
_(01EN)_11-14-18.indd 10
4
4
Slide the power switch upwards
to turn on the appliance.
• The steam is released after about
1 minute.
• The hissing sound is due to
electrical discharge.
The sound may be intermittent,
depending on how the steam is
produced.
5
5
Direct the steam to your face.
• Keep your face at least 20 cm
away from the edge of the lid.
• If you cannot judge the distance,
use the distance guide below.
• To ensure that the steam covers
your entire face, direct the steam
to the top of your chin.
• If you have trouble adjusting the
position of the steam on your
face, try adjusting the height of
the table, chair or cushion.
• When the remaining water is low,
the way that the steam is emitted
changes.
Distance guide
Steam within this range is hot.
20 cm
2018/11/14 10:04:52
Advertisement
Chapters
Table of Contents
