Table of Contents
Advertisement
ideapad 320C-15IKB Hardware Maintenance Manual
36
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover and put on
the new base cover.
Rating label
a
b
Rating label for print
c
OS label
d
Office label
e
Adapter label 65 × 20mm
Argentina label 68 × 6mm
f
g
KCC label 50 × 16mm
h
Indonesia label 32 × 10mm
i
TW label 70 × 10mm
j
BIS label 22 × 30mm
WL/BT label 35 × 15mm
k
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figures:
e
i
a
b
c
f
j
d
g
h
k
Advertisement
Table of Contents
