ideapad 320C-15IKB Hardware Maintenance Manual
Figure 8. Removal steps of fan assembly and Heat Sink assembly (continued)
Unplug the fan connector in the direction shown by arrow 2. Remove the
screw 3.
When installing: Make sure that the connector is attached firmly.
Remove the fan in the direction shown by arrow 4. Be careful not to damage
the connector.
46
Step
Screw (quantity)
M2 × 6 mm, Phillips head, nylok-coated (1)
3
fan---mb---log up & fan---log up
c
b
Color
Torque
Black
1.85+/-0.15 kgf/cm
d