Advertisement
4.Condition of splice adaptor using
1)Calculation of all transmission loss
It is using less than maximum acceptable transmission loss.
Method of calculation is subject 3.1.
2)Measurement of all transmission loss
It is measured all transmission loss between units which connection loss of slice adapter.
And check the value of above 1).
Also it will keep the measurement value and using when regular inspection.
3)Regular inspection
Please confirm to not increase the all transmission loss when regular inspection.
When the loss will be increasing, please clean the connector terminal or re-processing connector.
Contact Mitsubishi Sales Offices or dealers for details about measuring the transmission loss.
4)Protection of splice connection adapter
Please contain to a connection box as not come in dust etc. Moreover the optical fiber cable and splice
adaptor is fixed, and external tension should not add them.
5)The connection of optical fiber
The connection of optical fiber must be connected with same series optical fiber.
In case of connect with different series optical fiber, the connection loss is to be increasing.
5.Installation environment
1)Working temperature range: -10 to 70℃.
2)Vibration: Avoid installing this product where vibration is present.
6.Outline drawing
C&C CENTER OVERSEAS SUPPORT GROUP （JAPAN）
Mail ： osb.webmaster@melsc.jp
X903041101E
Mounting screw size: M3 pan head screw
(Use with flat washer and spring washer)
Tightening torque: 29.4 to 39.2N・cm
（ｍｍ）
Issue Date: June, 2020
Advertisement
