1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
3 Disassembly Instructions Follow the procedure below to disassemble the main body. (a) Loosen a screw. (b) Remove the bottom cover (c) Push up the blade of trimmer. (d) Loosen a screw. (e) Remove the upper rear panel. (f) Loosen two screws. (g) Remove the rear panel.
5 Exploded View and Replacement Parts List Model No. : ES-LF50 Exploded View...
Page 6
Model No. : ES-LF50 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks WESLF70X7158 PROTECTIVE CAP WESLF50S0048 OUTER FOIL FRAME WES9167E OUTER FOIL WES9068E INNER BLADE WESLF50L1008 LINEAR MOTOR ASSEMBLY WES8258L1087 TRIMMER DRIVING BAR WES8258L1077 SLIT BLADE DRIVING BAR...