Wired Controller Function
Functions
Initialization interface
When the wired controller is connecting with the unit, the interface display is as follows:
After the wired controller connected with the unit, the interface display is as follows (only valid for part of models)*
The password contains 4 numbers and please contact aftermarket personnel for the initial password.
The method to input the password: Use
button to adjust each number ranging from 0-9, and press
correct, it will turn into the main interface. If the password is wrong, the pop display is as follows:
or
button to switch the numbers' location, use
button to confirm the input. If the password is
31
or