LG C2 User Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. OLED TV
  5. C2
  6. User manual

LG C2 User Manual

Hide thumbs Also See for C2:
Table of Contents

Advertisement

Quick Links

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
LG OLED C2 83"
(OLED83C24LA)
o cerca il tuo prodotto tra le
migliori offerte di Televisori

Advertisement

Table of Contents
loading

Related Manuals for LG C2

Summary of Contents for LG C2

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per LG OLED C2 83" (OLED83C24LA) o cerca il tuo prodotto tra le migliori offerte di Televisori...

  • Page 2: Table Of Contents

    Contents Getting Started with LG webOS TV ..................
  • Page 3 ..................Installing Apps .
  • Page 4 ..................Troubleshooting LG Account Issues .

  • Page 5: Getting Started With Lg Webos Tv

    Returns to the most recently used TV or external input. You can get recommendations from various channels and programmes. You must log in to your LG account to get personalized content recommendations. You must connect to the network to use the recommendation feature.

  • Page 6: Manage Home

    Available features vary depending on the region or service. Manage Home Manage LG webOS TV Home You can change the order of the displayed apps or content lists by pressing the button on the remote control.

  • Page 7: Live Tv Preparation

    reset them, it takes some time to receive recommendations for contents again. Home Settings : When turning the power on, go to the screen that sets the Home behavior or advertising display. User Guide User Guide : Move to the app.
  • Page 8 Connect the LAN port of the TV and the router using a LAN cable. The router should be connected to the Internet beforehand. If the router supports DHCP, the TV is automatically connected to the network when you connect the TV to the network with a LAN cable. If the Network Is Not Automatically Connected Press the button on the remote control.
  • Page 9 Resetting the router may cause network connection problems. In this case, the router will operate normally if you turn it off and disconnect the TV, and then reconnect and turn it on. LG Electronics is not responsible for network connectivity or operation failure due to problems such as equipment failure or disconnected lines.

  • Page 10: Managing Your Lg Account

    You can sign up for LG membership and log in with your email address in Account. Alternatively, you can sign up for LG membership using the ID and password of an external service account.

  • Page 11: Using Always Ready

    Using Always Ready Using Always Ready Turning off the TV switches it to Always Ready and displays the selected screen wallpaper, and then you can use voice recognition or output sound from your smart device to the TV speaker. Set the Enable the function General Always Ready to On.
  • Page 12 Moments : You can set a photo saved in a connected external device or a photo of a smart device connected to the LG ThinQ as the wallpaper. Sound Palette : You can play music from a device connected via Bluetooth or USB.

  • Page 13: About User Guide

    Some models may not be supported. About User Guide About User Guide For information on each feature of the LG webOS TV, consult the User Guide available on the TV. You can check the description of the associated...

  • Page 14: How To Operate Tv

    You can purchase the Magic Remote separately if it is not provided. Pairing the Magic Remote You must pair the Magic Remote with the LG webOS TV to use it. Pair the Magic Remote prior to use as follows: Turn on the TV. After about 20 seconds, point the remote toward the TV and then...

  • Page 15: Using The Magic Remote

    The previously registered remote control is deregistered and then registered again. Unregistering Magic Remote If you have multiple LG Smart TVs and want to register the Magic Remote currently in use to another TV, you must unregister the previous one.
  • Page 16 For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...

  • Page 17: Using Tv Features With Hands-Free Voice Control

    This function is only available when the TV is connected to the Internet. If Hands-free Voice Control does not work, set Use Hands-free Voice Control General AI Service Voice Recognition Settings. When the TV is on Say “Hi LG” within the watching distance from your TV. The speech recognition screen appears.
  • Page 18 The Standby Light on the front of the TV will change to white. When you say “Hi LG” to the TV, the Standby Light on the front of the TV will blink and the TV will produce an alert sound.

  • Page 19: Using Tv Functions Through Speech

    When set to the store mode ● If the TV has not been turned on for more than 96 hours ● When pixel cleaning is running ● Precautions When Using Hands-free Voice Control Some models do not support this function. The operation may be limited depending on the country and language settings.
  • Page 20 Some models may not be supported. Menu Language Location must be set as the official language of the country in to see Menu Language correct search results. If is not set as the official language, some functions may be limited. General System Language...

  • Page 21: Speech To Text

    The rate of speech recognition may vary depending on the characteristics of the user (voice volume, pronunciation, accent, and talking speed) and the surroundings (noise and TV volume). To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate manner at an appropriate voice volume at a distance of about 10 cm away from the Magic Remote’s microphone.
  • Page 22 If there are words similar to that which you spoke out loud, you may see a list of multiple results as shown below. If you do not get the results you want, press RETRY to try again. Select a result and it will be displayed on the text box. Cautions When Using Speech to Text Check the network connection before using the Speech to Text function.

  • Page 23: Control Your Tv With Your Voice With Google Assistant

    Language . To temporarily switch to another speech recognition language, press the button in the voice recognition information display window. You can only use this function to agree to voice recognition terms. The Speech to Text rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).

  • Page 24: To View More Features Of The Remote Control

    Press the (Amazon Alexa) button on the remote control to access the settings and help information for Amazon Alexa. Different services may run in countries where Amazon Alexa is not supported. Service operation and supported countries may change in accordance with Amazon’s policies.

  • Page 25: Using Universal Remote Control

    Additional features can be set when you watch a live broadcast. Available features may vary depending on the broadcast signal. More Actions The types of buttons appearing on the vary, depending on the region and the type of connected device. Using Universal Remote Control Automatically Setting the Universal Remote Control When you set up the universal remote control, you can control the peripherals (Blu-...

  • Page 26: Launching Apps Through Quick Access

    You can purchase the Magic Remote separately if it is not provided. Some models may not be supported. When changing settings on a device, make sure it is powered on first. To set up a universal remote control with the latest information, connect to the network and accept the User Agreements.

  • Page 27: Connecting To Simplink (Hdmi-Cec)

    Selecting a number that has already been registered allows deregistering it. When you select a number that has not been registered, items that can be registered will be shown. An item that has been registered to a different number is indicated with a check mark. You can view a brief instruction for this function.

  • Page 28: Shortcuts To Accessibility

    This feature works only with devices with the logo. Check for the SIMPLINK logo on the external device. Use of any product other than those specified may cause problems during operation. ® To use SIMPLINK, you need to use a high-speed HDMI cable with CEC (Consumer ®...

  • Page 29: Connecting An Input Device To Usb

    Connect your keyboard to the USB port. You can enter text with the connected keyboard device. It is not possible to enter text on some screens. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech K360, Logitech K400, Logitech K750 You can change the input language by pressing the language switch key or the right Alt key, And also can change by pressing the Ctrl key and the Space key at same time.

  • Page 30: Enjoy Live Tv

    Controller, Logitech F310, Logitech F710 Connecting Bluetooth Input Devices You can connect and use devices such as a Bluetooth-enabled keyboard, mouse, or a gamepad with your TV. To see the details, click the Settings Devices External Devices Connect Bluetooth Controller User Guide.

  • Page 31: Viewing Guide

    TV Scheduler : You can enter the time and date of a programme to schedule watching or recording it at the set time. To see the details, click the Enjoy Live TV Using TV Scheduler User Guide Recordings : You can check the recordings stored in the storage device and play the recordings.

  • Page 32: Checking Programme Info

    Select each area to access the corresponding feature. You can view information on the programme and broadcaster. You can view information about the programme you are currently watching as well as the focused programme information. Select the button or the title of the desired programme. You can view more information on the programme and perform Watch Record...

  • Page 33: Live Playback

    appears. You can move the banner's position by pressing the button on the remote control and selecting Change Banner Location. If your remote control does not have a button, press and hold the button. It displays the information about the programme you are watching. Select a programme banner to enter the detailed information pop-up to see the detailed programme information or run additional features related to the banner.
  • Page 34 watching to a USB HDD, so you can play back any scenes you might miss while watching TV. This function allows you to continue watching from where you were previously if you go out for a while. Input the USB HDD in the USB port. Press the button on the remote control and select Live...

  • Page 35: Recording

    Changing between programmes during Live Playback will delete the data of the previous programme. Some models may not be supported. Recording Using Instant Recording Connect a USB HDD or USB stick to a USB port. It is recommended that you record to a USB HDD. Press the button on the remote control and select Record.

  • Page 36: Music Catch

    test. Start recording after the test has been completed normally. Because of the content protection technology used, the recorded video cannot be played on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is replaced.

  • Page 37: Using Tv Scheduler

    Select a device to be used with record the music when USB HDD is connected to the TV. If there is not enough remaining space in the USB HDD device, Music Catch may not work properly. To use Music Catch function, you need the USB HDD which has at least 100MB. Media Player Stored files can be viewed in the app, and you can open them on your PC or...
  • Page 38 You can set the New Scheduled Recording. You can set the New Reminder. Sort : You can sort the list. Filter : Sets the filter. Delete : You can set the Delete Mode. Guide Guide : Launch User Guide User Guide : Launch Quit App : Turns off the app from running in the background.

  • Page 39: Playing Recorded Tv Programs

    Live TV by pressing . Press the button on the remote control and select Scheduler. If your remote control does not have a button, press and hold the button. Select the or the . Select Create Manually. Set the date, time, and programme to record or watch. The length of the scheduled recording should be at least 1 minute.

  • Page 40: Watching Internet Channel (Lg Channels)

    Fast-forwards the video at higher speeds. You can set features such as Resume and the audio language that can be outputted. A list of recordings is shown below. The configurable items differ depending on model. Watching Internet Channel (LG Channels)

  • Page 41: Teletext

    Channels. Press the button on the remote control and select Channels. You can also watch LG Channels by pressing the (Programmes) / buttons on the remote control. You can use the ’Interactive Programme’ service that enables users to conveniently enjoy content related to the current programme without having to switch apps.
  • Page 42 If your remote control does not have a button, press and hold the button. Select Teletext. The Teletext window appears. To view TV broadcasts and Teletext at the same time, press the button on the remote control and select Teletext. Colour button To select the preceding or following page.

  • Page 43: Hbbtv

    more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.

  • Page 44: Apps And Content

    HbbTV (Hybrid Broadcast Broadband TV) is a new broadcasting standard that enables super-teletext type services, delivered by a broadcast TV programme, to be integrated or linked to online services delivered over broadband to a connected Smart TV. Consumers are therefore able to access various online services such as catch-up TV, Video on Demand (VOD), programme related applications and other rich information services in addition to traditional digital teletext services, all directly on to the TV in a seamless experience.
  • Page 45 To see the details, click the Apps and Content Content Search User Guide You can log in to your LG account. You can manage apps, such as updating or deleting installed apps. Closes the app. To turn off the app from running in the background, press the...
  • Page 46 Some USB storage devices may not be supported or may not work properly. USB stick containing apps from other TVs may not be used. Exercise caution when in use by children. Children may have access to inappropriate online content through this product. You can block inappropriate online content by restricting access to some apps.
  • Page 47 provided differently. The list of the recommendations may be less relevant or irrelevant, depending on the information of the programme you are watching. Content Search Content Search Searches for content by title, actor/actress, and genre. Press the button on the remote control. Launch Search for a variety of content and information using the desired search terms.
  • Page 48 Connecting External Devices Using Home Dashboard Using Home Dashboard You can select or control a device (mobile, external device, Home IoT Devices, etc.) connected to the TV. Home Dashboard by pressing the button on the remote control. You can also press and hold the button on Magic Remote.
  • Page 49 Log in to your LG ThinQ account. A list of the registered LG ThinQ devices will appear. If you are in an area where the LG ThinQ app is not in service, LG ThinQ device connection...
  • Page 50 You can check the connection guide for each type of . You can connect and see devices registered with your LG ThinQ account or IoT devices. Once the device is connected, the card will be changed to a smaller size and appear at the bottom of the device connection list.
  • Page 51 Run the LG ThinQ app installed on your smart device. Follow the instructions from LG ThinQ app to connect your smart device to the TV. When your account information of LG ThinQ is linked to the TV, you can manage...
  • Page 52 View All Simple remote control operation is possible. Select and try using the remote control in full screen. You can share and enjoy the sound, screen, or content on the TV and smart device interactively. Displays a list of apps installed on the TV. Displays a list of devices connected to the TV's external input.
  • Page 53 Near Field Communication (NFC) is a technology that allows you to conveniently send and receive information without any separate settings. By bringing a smart device near the NFC-enabled remote control you can install the LG ThinQ app and connect the device to the TV.
  • Page 54 This feature is available for NFC-enabled smart devices only. Depending on the smart device, the NFC location may be different. For more information, refer to the user manual of the device. Features connected via NFC may differ depending on the smart device. This feature is only available if the remote control has an NFC logo.
  • Page 55 its user guide. If connection fails repeatedly, turn off the TV and the device you want to connect to, then turn them back on and try again. Playing Sound from a Smart Device through the TV’s Speakers Playing Sound from a Smart Device through the TV’s Speakers Connect a smart device to the TV via Bluetooth to play sound from the smart device through the TV’s speakers.
  • Page 56 If you use a USB extension cable, the USB storage device may not be recognised or may not work properly. Please use only USB storage devices formatted with the FAT32, exFAT or NTFS file system provided by Windows OS. It is recommended that you use an external USB HDD with a rated voltage of 5 V or less and a rated current of 500 mA or less.
  • Page 57 Select a device to use from the device list. Select the content to play. You can select a device connected to your TV. Displayed only when music is playing. Press the to access the Play Music screen. Launch Search View Type : Selects a content display mode.
  • Page 58 You can select a photo from the Media Player app and view the photo. You can use more features by pressing the button on the remote control while viewing a photo. Shows the previous content. Starts the slide show. Shows the next content. Rotates photos.
  • Page 59 You can access more features by pressing the button on the remote control while playing a video. Shows the previous video. Plays or pauses the video. Shows the next video. You can change subtitle settings. Rotates videos. Fast-rewinds the video at higher speeds. You can do the settings related to play on repeat of the video.
  • Page 60 Listening to Music You can select a song from the Media Player app and play the song. You can use more features by pressing the button on the remote control while playing a song. You can set the random play mode. You can set the repeat play mode.
  • Page 61 Turn on the power of the PC to which you wish to connect. Turn on "Enable Remote Desktop" in the PC settings. Press the button on the remote control to launch Home Dashboard. Run the Remote Enter the IP address, User Name, and Password...
  • Page 62 Open the “Start” menu on your PC screen, search for “media streaming options” and then select the result that appears. Select the “Turn on media streaming” button in the window that opens. Allow all of the “media streaming options”. Select “OK” to save the settings. Select the connected PC in the Home Dashboard app on the TV, and then select...

  • Page 63: Making The Most Of Smart Tv

    Watching PC Screen on TV Connect Wireless (Windows 10) Click the Notification Centre icon on the taskbar on the PC screen and select Connect. Select the TV you want to connect to and request the connection. After the connection is established, the TV will display the screen of the connected It is recommended that you always update your device to be connected to your TV to the latest OS version for a reliable connection.

  • Page 64: To Use Magic Explorer

    To Use Magic Explorer To Use Magic Explorer You can run a search conveniently through various apps based on on-screen text or video information. Magic Explorer can be used if the pointer colour of the Magic Remote changes (e.g., to the ). Press and hold the Wheel (OK) button on the image if you are watching a...
  • Page 65 Press the button on the remote control. Select on the screen. You can select a screen layout. Side by Side : You can view two apps on a split-screen. : You can run another app on top of the current screen and view it as a pop-up screen. You can choose which app you wish to run alongside the app that is currently running.

  • Page 66: Using The Room To Room Share

    You can operate the sub-screen. You can select the screen of which to output sound. Change to Side by Side mode. Closes the app. Using Side by Side Mode You can operate the selected screen. The sound of the selected screen is output. Change to mode.
  • Page 67 Room to When connecting with the LG ThinQ app in , all TVs to be used with Room Share must be registered to the same LG ThinQ account. You can transmit only Live TV or set-top box screens connected via HDMI.

  • Page 68: Making The Most Of Art Gallery

    Making the Most of Art Gallery Making the Most of Art Gallery You can enjoy a high-definition image provided for each theme. Press the button on the remote control. Run the Art Gallery app. View the built-in images for each theme. You can view the information and image of the focused theme in advance.
  • Page 69 Press the button on the remote control. Run the Web Browser application. You can refresh the web page you are viewing. You can type in a web address to navigate to a specific website or enter a search term directly. You can view the tabs that are currently open.
  • Page 70 Flash Plug-in is not supported, and only HTML5 media is supported. ● Plug-in installation is not supported. ● Media in formats other than JPEG/PNG/GIF may not be played. ● Apps may be forced to shut down if the TV runs out of memory. ●...
  • Page 71 LG Electronics headquarters (Korea). The submitted information will only be used to improve the Web Browser performance.

  • Page 72: Connecting A Camera To The Tv

    Select Camera. For a detailed description of the camera’s functions, refer to the device's manual. The camera must be purchased separately. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech C920/C920s/C922 Pro/C922x/C925e/C930c/C930e Depending on the installation status of the TV, the camera may not be mounted on the TV.

  • Page 73: Using Sports Alert

    Multi View This feature is available only on models that support the feature. Using Sports Alert Using Sports Alert Press the button on the remote control. Run the Sports Alert app. You can view the list of teams by league and detailed information. Press to register your preferred team or player.

  • Page 74: Settings

    set-top box. If you set up a universal remote control, you can use Live Plus even when using external devices. This service is provided for only select content with contracted partners. Settings Quick Settings To Use Setting Function Quickly Set of light-weight controls quickly and simply such as Picture Mode, Sound...
  • Page 75 You can set more options. You can also long-press button of the remote control to run the All settings directly. You can add/delete the quick setting items or change their order. Move to an item that can be set up, press the remote control's Wheel (OK) button once, and then press and hold the...

  • Page 76: Picture

    control to run the All settings directly. Launch User Guide The configurable items differ depending on model. Picture Selecting Picture Mode Picture Select Mode Select the picture mode that is best suited to your viewing environment, preferences or video type. Select a picture mode.
  • Page 77 Game Optimiser Suitable picture for gameplay. FILMMAKER MODE Provides optimized Cinema Picture quality certified by UHD Alliance, the standard setting body for UHD-related technologies. FILMMAKER MODE To auto-switch to when a signal that can be operated with this mode is entered, set FILMMAKER MODE Auto Start Expert (Bright space, daytime) Expert (Dark space, night)
  • Page 78 FILMMAKER MODE To auto-switch to when a signal that can be operated with this FILMMAKER MODE Auto Start mode is entered, set If the HDR/Dolby Vision video signal is input to the models that do not support the HDR/Dolby Vision technology, It will be provide normal signals picture mode options. Depending on the input signal, the available picture modes may be different.
  • Page 79 The picture may get distorted while zooming in or out. Selecting a different screen size from the original size may cause the image to look different. Depending on the combination of picture format and screen size, the edges may be hidden or shown in black, or both sides of the picture may flicker.
  • Page 80 Saving Energy Saving Step Minimum and set to Depending on your TV model, it might not have the OLED Pixel Brightness setting. Adjust Contrast Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast.
  • Page 81 Turning this option may increase energy consumption. Motion Eye Care Automatically adjusts brightness and reduces image blur based on image data to reduce eyestrain. Turning this option may increase energy consumption. Depending on the input signal or the selected picture mode, the available options may differ.
  • Page 82 Sets the Colour Gamut to Adobe RGB standards. Fine Tune This is used when experts control it by using a test pattern. You can control it by selecting areas of six colours (Red/Green/Blue/Cyan/Magenta/Yellow). For normal images, adjustments may not result in noticeable colour changes. Colour Adjustment Adjusts the Colour and saturation of the picture to make the image more Colourful and lively.
  • Page 83 Signal Level(%) Select screen brightness for color temperature adjustment. Method is set to 10 Points Signal Level(%), you can select brightness using numbers indicating 10 levels. When the Method is set to 22 Points Signal Level(%), you can select the brightness with the 22 levels of brightness.
  • Page 84 Removes small dots that stand out so as to make the image clean. MPEG Noise Reduction Reduces the noise produced during the creation of digital video signals. Smooth Gradation It reduces the phenomenon that the outline of the image is rugged and in a staircase pattern and displays a smoother screen.

  • Page 85: Sound

    Resetting Picture Mode Picture Advanced Settings Reset If you want to reset the image settings to the factory defaults after configuring the image settings, select reset for each image mode. FILMMAKER MODE Auto Start Picture Advanced Settings FILMMAKER MODE Auto Start If set to On, Picture Mode will automatically be changed to...
  • Page 86 Depending on the content you watch, you can enjoy the optimised sound and virtual surround in real time. Standard Optimises the sound for all types of content. Cinema Optimises the sound for cinemas. Clear Voice Clear Voice Pro Boosts voice clarity. Sports Football Cricket...
  • Page 87 For some Bluetooth devices, the device volume can be controlled by selecting from the ● connection list. LG Sound Sync devices will automatically try to connect to the recently used devices ● when you turn the TV on. We recommend that you connect an LG audio device that supports LG Sound Sync, ●...
  • Page 88 For more information on the purchase of WiSA authorized products, check on www.wisaassociation.org. Mobile Device If you install the LG ThinQ app on a smart device and connect it to your TV, you can use the device as a speaker for the TV. Use Wired Speaker...
  • Page 89 Sound Sound Out Use External Speakers with TV Speaker Audio can be played through the multiple devices simultaneously. Bluetooth Device + TV Speaker Both the internal speaker of the TV and the Bluetooth speaker can be used to output the sound at the same time or a surround sound can be used.
  • Page 90 Dolby Atmos is based on the concept of audio objects. Any sound can be mixed as a single audio element, an object, that’s independently placed in three-dimensional space. Your new LG TV has been enabled with the latest Dolby Atmos sound technology. Dolby Atmos is the ultimate sound experience which creates moving audio that flows around you using TV speakers.
  • Page 91 Restores the detailed effect settings for the Standard sound mode to the initial settings. HDMI (eARC/ARC) This setting only applies to the internal speakers of the TV or Sound Mode Share connected devices that support Installation Type Sound Advanced Settings Installation Type This mode optimises the sound based on the TV setup.
  • Page 92 Some models may not be supported. Adjusting AV Synchronization Sound Advanced Settings Match Screen and Sound Adjusts the synchronization of the sound from the speaker that is working. The closer the value is set to 60, the slower the voice output speed will be than the default speed.
  • Page 93 Sync device using a TV remote control. If the auto-power feature of the sound bar that supports LG Sound Sync is set to On, the sound bar will be turned on or off together when the TV is turned on or off.

  • Page 94: Always Ready

    HE-AAC / AAC (Optical) Dolby Digital (HDMI ARC) Dolby Digital / Dolby Digital Plus Dolby TrueHD , HDMI eARC , Dolby Atmos : Some models may not be supported. When connected with HDMI eARC, the output audio type will depend on the audio type supported by the connected device.

  • Page 95: Ai Service

    AI Picture Pro General AI Service AI Picture Pro When set to On, artificial intelligence, which has been trained with LG Electronics’ deep learning techniques, finds the most suitable resolution according to the video type and displays it using vivid, realistic, and rich colours.
  • Page 96 AI Sound AI Sound Pro General AI Service AI Sound AI Sound Pro If set to On, the optimal sound and realistic surround effects are provided per the content based on artificial intelligence. HDMI (eARC/ARC) This setting only applies to the internal speakers of the TV or connected devices that support Sound Mode Share When this feature is set to...
  • Page 97 General AI Service Voice Recognition Help It shows a list of voice commands the TV can perform. Using Voice Recognition Settings General AI Service Voice Recognition Settings You can apply settings for voice recognition features. AI Recommendation General AI Service AI Recommendation You can get content recommendation messages according to your content viewing history and app usage history.

  • Page 98: Game Optimiser

    Game Optimiser Game Optimiser Sets up the features for an immersive experience when you play with a video game console. Press the button on the remote control. Select Game Optimiser. Selecting turns on all related settings. It only works with HDMI inputs. If you set Picture Select Mode...
  • Page 99 Minimize the input delay according to the image signal. Game Dashboard If you set this option to On, you can use the Game Dashboard feature. Settings Quick Settings Game Dashboard User Guide Please see for more information about Game Dashboard AI Game Sound Optimises the sound for gameplay.
  • Page 100 Picture Black Stabiliser You can fine-tune dark areas. White Stabiliser You can fine-tune light areas. Adjust Contrast Adjusts the contrast of the bright and dark areas of the picture. Black Level Adjusts the overall screen brightness. You may use the Black Level settings particularly to set the dark part of the image.

  • Page 101: Oled Care

    OLED Care OLED Care General OLED Care It provides various premium care services for OLED TV users. Care Picture Settings It sets the screen mode suitable for your viewing pattern. Picture Select Mode Device Self Care Energy Saving cannot be set while using the Care Picture Settings Turns off the...
  • Page 102 If there are no problems in the test, check the connected external device or broadcast signal. Sound Self-diagnosis Start the Sound Test to check that the sound signal output is normal, and then select whether there is an error. If there are no problems in the test, check the connected external device or broadcast signal.

  • Page 103: Family Settings

    OLED Panel Care With OLED Panel Care, you can improve image quality issues related to image sticking when the screen has been on for a certain amount of time. Pixel Cleaning It calibrates any issues that may arise on the screen when your TV has been turned on for a long time.

  • Page 104: Programmes

    User Guide Eye Care Mode General Family Settings Eye Care Mode Enable the function to On. A screen with lowered blue light is displayed for the protection of your eyes. Eye Care Mode Picture Advanced Settings Reduce Blue light Using sets Volume Limit Mode General Family Settings Volume Limit Mode...
  • Page 105 If Input Source is not connected properly, programme registration may not work. Auto Tuning only finds programmes that are currently broadcasting. Safety is turned on, a pop-up window will appear asking for password. Set Cable Setting When searching for programmes using FULL setting it can take a long time. The following values are needed in order to search all available programmes quickly and correctly.
  • Page 106 LNB Frequency Select one value from 9750/10600, 9750/10750, 9750, 10600, 10750, 11300, 5150, MDU1, MDU2, MDU3, MDU4, MDU5. If you select 9750/10600, 9750/10750(MHz), 22kHz Tone is disabled. If you cannot find the LNB frequency value from the list, select User and manually enter the frequency. Some models may not be supported.
  • Page 107 Drive Direction Select the direction in which you want to move the motor. Drive Mode Two modes are available : Step and Continuous. Step : The motor moves based on the value you enter (from 1 to 128). ● Continuous : The motor moves continuously until you press the Stop.
  • Page 108 It updates the Programme List when the TV is turned off. After updates, the Programme List may be changed. If not want, select Off. Some models may not be supported. To Use the Signal Test General Programmes Programme Tuning (Programme Tuning & Settings) Signal Test Shows the MUX and Service information etc.
  • Page 109 Move : Move the selected programmes. Edit Programme Numbers : Change the numbers of the selected programmes. Delete : Delete the selected programmes. Available features may vary depending on the broadcast signal. For a model that supports satellite programmemes, you can manage the satellite Edit Satellite Programmes (Advanced) programmes in Edit Favourite Programmes List...

  • Page 110: Network

    Copy Programmes General Programmes Copy Programmes Export your TV’s programme list information to a connected USB storage device or Import your TV’s programme list information from a connected USB storage device. For Satellite models Network Setting a Wired Network General Network Wired Connection (Ethernet) If the router connected to the network supports the DHCP feature, connecting the TV and router by wire will automatically connects to the network.

  • Page 111: Devices

    IP address information. In addition, you can change the IP address and DNS server address you want to connect to by pressing the Edit button. For more information on how to connect to the network, see Getting Started with LG webOS TV Connecting to the Network User Guide Devices Setting TV...
  • Page 112 When a device you've connected before is turned on, it automatically connects to your TV. To disconnect the existing connection, click Disconnect. It is recommended that you use a product that has been tested for compatibility with LG TVs. Bluetooth Mouse : Logitech M535, Logitech MX Master 2S, Apple Magic Mouse2...
  • Page 113 Turn on via Wi-Fi Turn on via Bluetooth is set to On, you can turn on your TV using an application that supports TV On With Mobile. The TV should be connected to a network. The TV and the device to be used should be connected to the same network. Turn on via Wi-Fi feature must be used in an app on a smart device that supports the feature.
  • Page 114 3840 × 2160p YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:0 4096 × 2160p 59.94 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:4:4 RGB 4:4:4 4K @ 100/120 Hz Support Format (120 Hz models only) Resolution Frame rate (Hz) Colour Depth/Chroma Sampling 8 bit 10 bit 12 bit...
  • Page 115 You can specify a different setting for each HDMI port. SIMPLINK (HDMI-CEC) You can conveniently control and use various multimedia devices connected through HDMI with the TV remote control. To see the details, click the How to Operate TV Connecting to SIMPLINK (HDMI- CEC) User Guide.
  • Page 116 Postcode This function is used to set the broadcast location of the TV by entering your postcode. LG Services Country If you don’t set the Automatically, you can select the country manually. You must set the country manually when you are not connected to the network.
  • Page 117 When select the Custom Time Zone, Custom Time Zone menu is activated. Timers Sleep Timer Sets the TV to turn off at a specified time. If you do not want to use Sleep Timer, select Off. Power On Timer Power On Timer to On.
  • Page 118 General System Safety You can put a lock on TV broadcasts or apps. Set it to to apply the lock. TV Rating Locks This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
  • Page 119 Enter the numbers “0313” in the master password input window, then press OK. The password will be reset. Managing Your LG Account You can sign up for LG membership and log in with your email address in Account. For more information, see...
  • Page 120 General System Additional Settings Home Settings Home Auto Launch You can set Home to launch automatically when turning on the TV. Home Promotion You can turn on or off the advertisements on the Home screen. The configurable items differ depending on model. To Set Power Indicator General System Additional Settings Standby Light You can turn the standby light on or off.
  • Page 121 Limit AD Tracking If set to On, personalised advertisements based on user interests may not be provided. Reset AD ID User interest information is newly collected, and advertisements are provided according to the information. Some models may not be supported. Using the Live Plus Live Plus...
  • Page 122 environment. Restoring the Default Settings General System Reset to Initial Settings Return TV to its initial settings. After reset, the TV will automatically turn off and on. Reset All All items on the TV are changed to their default settings. Reset all except network settings All items except the network settings are changed to their default settings.
  • Page 123 screen and font colours to highlight the contrast between the light and dark areas. Greyscale General Accessibility Greyscale Change the colour of the menu on the screen to black and white tone to make its ambiguity very clear. Set to On. Invert Colours General Accessibility Invert Colours To enhance the visibility of the menus on the screen, you can invert and calibrate...
  • Page 124 Normal Selects default Audio. Audio Description For the visually impaired Selects the preferred default Audio combined with Visual Impaired Audio. Spoken Subtitle For the visually impaired, selects the preferred Visual Impaired Audio only. Any Supplementary Audio Displays all supplementary audio. Some models may not be supported.
  • Page 125 To Set Hard of Hearing Press the button on the remote control. Select General Accessibility. Subtitles to On. Hard of Hearing to On. A caption will be provided for the hearing-impaired. Hard of Hearing When the is turned , it will be prioritized over the general captions. Some models may not be supported.
  • Page 126 Support Privacy & Terms User Agreements These are the terms and conditions related to use of the Smart TV service and protection of privacy. Legal Notice It's a legal notice for services provided via TV. Open Source Software Notice You can view the instructions for each item. Troubleshooting Perform Check-up with the Quick Help Perform Check-up with the...
  • Page 127 LG Remote Service You can get help for troubleshooting through the remote control. LG Remote Service, make sure to contact the LG Electronics Customer Service Center. This function may not be available in some countries or models. When there is no related content in the...
  • Page 128 Ready will remain. How can I continue to use Always Ready without a wallpaper? Selecting Use Always Ready without wallpaper General Always Ready Always Ready enables you to immediately switch to with the screen off by pressing the button on the remote control while watching TV. I don't want to use Always Ready.
  • Page 129 If you are using a multi-outlet, check if it is working properly. To check whether a power strip is working properly, plug the TV’s power plug directly to a wall outlet and observe its operation. Try to power on using the button on your TV set. The power is on, but the screen comes on later.
  • Page 130 If you are using a set-top box, the TV may be set to turn off when the set-top box is turned off. To prevent the TV from turning off when you turn off the set-top box, switch the TV power sync function off on the set-top box. I cannot turn on or operate the device with the TV remote control even after setting the universal remote control.
  • Page 131 The screen is cut off. Picture Aspect Ratio Go to and change the When using an external device (set-top box, game console, etc.), check the screen size settings in the Settings menu of the device. The screen shakes after the momentary appearance of vertical/horizontal lines and net pattern.
  • Page 132 upper/lower/left/right edges of the screen. Picture Aspect Ratio Just Scan Just Scan Just Scan shows you the original image as it is. If the signal is weak, the top/bottom/left/right sides of the screen may be snowy. I don’t see anything, or the image keeps flickering when I try to connect the HDMI cable.
  • Page 133 When you are connecting to the AV IN , check to ensure each cable is matched with the corresponding color connection. AV IN port is available in certain models only. ULTRA HD video does not display. With some HDMI cables, signals may not be received. Change the settings of the connected device to the supported signal.
  • Page 134 AV IN correctly connected. ( port is available in certain models only.) The TV sound is not synchronized with the picture, or the sound sometimes breaks If this happens on only some of the programmes, it may be caused by the broadcasting company’s transmission signal.
  • Page 135 Troubleshooting PC Connection Issues Home Dashboard by pressing the button on the remote control. Select Edit Inputs in the upper right corner. In the Edit mode, set the icon of the HDMI terminal connected to the PC to to apply the video and aspect ratio settings that are aligned with the PC.
  • Page 136 Troubleshooting Movie Playback Issues Troubleshooting Movie Playback Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. More information about supported files can be found in Being Aware of the Information Supported Video File Formats in the...
  • Page 137 I cannot see the subtitles. Check that the file plays without any problems on the video player on a PC. (Check for file damage.) Check that the video and subtitle files have the same name. Also check that both the video file and the subtitle file are in the same folder. Check that the subtitle file format is supported.
  • Page 138 Some USB storage devices require formatting on your TV. Formatting deletes all data stored on the USB storage device, and the device is formatted with the FAT32, exFAT or NTFS file system. Before you connect a USB storage device to your TV, back up any data that is stored on your device to your PC.
  • Page 139 Advanced Wi-Fi Settings Wi-Fi Connection Some models may support the function only. When X appears next to TV Check the TV or the AP (Router). Check the connection status of the TV, AP (Router) and cable modem. Power off and power on in the following order; 1.
  • Page 140 I wish to delete the account saved on the TV. When you log in to your LG account on the TV, the account will be saved to the TV. You can delete accounts stored on the TV at any time, as follows.
  • Page 141 It will not delete the login history or close the account. I wish to delete the usage history on the TV. When you use the TV after logging in to your LG account, the usage history will be saved and you can delete it at any time.
  • Page 142 If you cannot see some apps, it may be because you deleted them. Please reinstall the appropriate app. If the app is deleted, you can download the app at Apps and reinstall it. Go to Apps to find and install the app you want. The type of supported content differs by country.
  • Page 143 before the change, and is only applied to tabs opened after the change. Being Aware of the Information Supported Photo File Formats Supported Photo File Formats File Format Format Resolution jpeg, jpg, jpe JPEG Minimum : 64 × 64 Maximum Normal Type : 15360 (W) ×...
  • Page 144 Maximum Data Transfer Rate Full HD video ● H.264 1920 × 1080@60P BP/MP/HP@L4.2 Maximum 40Mbps HEVC 1920 × 1080@60P Main/Main10@L4.1 Maximum 40Mbps ULTRA HD video (ULTRA HD models only) ● H.264 3840 × 2160@30P BP/MP/HP@L5.1 Maximum 50Mbps HEVC 3840 × 2160@60P Main/Main10@L5.1 Maximum 60Mbps HFR video (HFR supported models only) ●...
  • Page 145 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM Video H.264/AVC, MPEG-4, HEVC, AV1, VVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 Video H.264/AVC, MPEG-4 Audio AAC, AMR-NB, AMR-WB Video MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC, AV1 Audio Dolby Digital, Dolby Digital Plus, AAC, PCM, MPEG-1 Layer I, II,...
  • Page 146 Estimation (Qpel) are not supported. ULTRA HD video (ULTRA HD models only) : 3840 × 2160, 4096 × 2160 Some HEVC-encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be supported after a software upgrade.
  • Page 147 Support MPEG-1, MPEG-2 Channels mono, stereo Bit rate Sample freq. 8 kHz ~ 96 kHz Support Channels mono, stereo Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq.
  • Page 148 Channels mono, stereo The number of supported programmes may vary depending on the sample frequency. Supported Resolution : HDMI-DTV HDMI-DTV Supported Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 × 480p 31.46 59.94 31.5 720 × 480p 31.46 59.94 31.5 720 ×...
  • Page 149 1920 × 1080p 26.97 23.97 28.12 33.71 29.97 33.75 56.25 67.43 59.94 67.5 1920 × 1080p 112.5 (ULTRA HD, 8K models only) 134.86 119.88 4) 5) 2560 × 1080p (ULTRA HD, 8K models only) 131.74 3840 × 2160p 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43...
  • Page 150 67.5 112.5 134.86 59.94 3840 × 2160p 1) 2) 3) (ULTRA HD, 8K models only) 269.73 119.88 4096 × 2160p 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5 134.86 59.94 4096 × 2160p 1) 2) 3) (ULTRA HD, 8K models only) 269.73 119.88...
  • Page 151 7680 × 4320p 107.89 23.97 (8K models only) 131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K. 3) (ULTRA HD models only) Only some HDMI input ports are supported. 4) Supported when Wide Aspect Ratio is set to 21:9.
  • Page 152 720 × 400 31.46 70.08 640 × 480 31.46 59.94 800 × 600 37.87 60.31 1024 × 768 48.36 1152 × 864 54.34 60.05 1360 × 768 47.71 60.01 1280 × 1024 63.98 60.02 1920 × 1080 67.5 1920 × 1080 134.86 119.88 (ULTRA HD, 8K models only)
  • Page 153 3840 × 2160 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5 134.86 59.94 3840 × 2160 (ULTRA HD, 8K models only) 269.73 119.88 4096 × 2160 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5...
  • Page 154 134.86 59.94 4096 × 2160 (ULTRA HD, 8K models only) 269.73 119.88 7680 × 4320 107.89 23.97 (8K models only) 131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K.
  • Page 155 The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners. Quickset...

Table of Contents