1. Manuals
  2. Brands
  3. LG Manuals
  4. OLED TV
  5. OLED55C28LB
  6. User manual

LG OLED55C28LB User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
LG OLED C2 55"
(OLED55C28LB)
o cerca il tuo prodotto tra le
migliori offerte di Televisori

Advertisement

Table of Contents
loading

Related Manuals for LG OLED55C28LB

Summary of Contents for LG OLED55C28LB

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per LG OLED C2 55" (OLED55C28LB) o cerca il tuo prodotto tra le migliori offerte di Televisori...

  • Page 2: Table Of Contents

    Contents Getting Started with LG webOS TV ..................
  • Page 3 Apps and Content ..................Installing Apps .
  • Page 4 ..................Troubleshooting LG Account Issues .

  • Page 5: Getting Started With Lg Webos Tv

    Returns to the most recently used TV or external input. You can get recommendations from various channels and programmes. You must log in to your LG account to get personalized content recommendations. You must connect to the network to use the recommendation feature.

  • Page 6: Manage Home

    Available features vary depending on the region or service. Manage Home Manage LG webOS TV Home You can change the order of the displayed apps or content lists by pressing the button on the remote control.

  • Page 7: Live Tv Preparation

    reset them, it takes some time to receive recommendations for contents again. Home Settings : When turning the power on, go to the screen that sets the Home behavior or advertising display. User Guide User Guide : Move to the app.
  • Page 8 Connect the LAN port of the TV and the router using a LAN cable. The router should be connected to the Internet beforehand. If the router supports DHCP, the TV is automatically connected to the network when you connect the TV to the network with a LAN cable. If the Network Is Not Automatically Connected Press the button on the remote control.
  • Page 9 Resetting the router may cause network connection problems. In this case, the router will operate normally if you turn it off and disconnect the TV, and then reconnect and turn it on. LG Electronics is not responsible for network connectivity or operation failure due to problems such as equipment failure or disconnected lines.

  • Page 10: Managing Your Lg Account

    You can sign up for LG membership and log in with your email address in Account. Alternatively, you can sign up for LG membership using the ID and password of an external service account.

  • Page 11: Using Always Ready

    Using Always Ready Using Always Ready Turning off the TV switches it to Always Ready and displays the selected screen wallpaper, and then you can use voice recognition or output sound from your smart device to the TV speaker. Set the Enable the function General Always Ready to On.
  • Page 12 Moments : You can set a photo saved in a connected external device or a photo of a smart device connected to the LG ThinQ as the wallpaper. Sound Palette : You can play music from a device connected via Bluetooth or USB.

  • Page 13: About User Guide

    Some models may not be supported. About User Guide About User Guide For information on each feature of the LG webOS TV, consult the User Guide available on the TV. You can check the description of the associated...

  • Page 14: How To Operate Tv

    You can purchase the Magic Remote separately if it is not provided. Pairing the Magic Remote You must pair the Magic Remote with the LG webOS TV to use it. Pair the Magic Remote prior to use as follows: Turn on the TV. After about 20 seconds, point the remote toward the TV and then...

  • Page 15: Using The Magic Remote

    The previously registered remote control is deregistered and then registered again. Unregistering Magic Remote If you have multiple LG Smart TVs and want to register the Magic Remote currently in use to another TV, you must unregister the previous one.
  • Page 16 For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...
  • Page 17 then re-appear. The pointer will disappear if you press / / / buttons, and the remote will work as a standard remote control. You can control the TV by scrolling or pressing Wheel (OK) button in the middle of / / / buttons. When viewing a screen that requires scrolling, you can easily move up and down by scrolling the Wheel (OK) button.
  • Page 18 For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...

  • Page 19: Using Tv Features With Hands-Free Voice Control

    This function is only available when the TV is connected to the Internet. If Hands-free Voice Control does not work, set Use Hands-free Voice Control General AI Service Voice Recognition Settings. When the TV is on Say “Hi LG” within the watching distance from your TV. The speech recognition screen appears.
  • Page 20 The Standby Light on the front of the TV will change to white. When you say “Hi LG” to the TV, the Standby Light on the front of the TV will blink and the TV will produce an alert sound.

  • Page 21: Using Tv Functions Through Speech

    When set to the store mode ● If the TV has not been turned on for more than 96 hours ● When pixel cleaning is running ● Precautions When Using Hands-free Voice Control Some models do not support this function. The operation may be limited depending on the country and language settings.
  • Page 22 Some models may not be supported. Menu Language Location must be set as the official language of the country in to see Menu Language correct search results. If is not set as the official language, some functions may be limited. General System Language...

  • Page 23: Speech To Text

    The rate of speech recognition may vary depending on the characteristics of the user (voice volume, pronunciation, accent, and talking speed) and the surroundings (noise and TV volume). To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate manner at an appropriate voice volume at a distance of about 10 cm away from the Magic Remote’s microphone.
  • Page 24 If there are words similar to that which you spoke out loud, you may see a list of multiple results as shown below. If you do not get the results you want, press RETRY to try again. Select a result and it will be displayed on the text box. Cautions When Using Speech to Text Check the network connection before using the Speech to Text function.

  • Page 25: Control Your Tv With Your Voice With Google Assistant

    Language . To temporarily switch to another speech recognition language, press the button in the voice recognition information display window. You can only use this function to agree to voice recognition terms. The Speech to Text rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).

  • Page 26: To View More Features Of The Remote Control

    Press the (Amazon Alexa) button on the remote control to access the settings and help information for Amazon Alexa. Different services may run in countries where Amazon Alexa is not supported. Service operation and supported countries may change in accordance with Amazon’s policies.

  • Page 27: Using Universal Remote Control

    Additional features can be set when you watch a live broadcast. Available features may vary depending on the broadcast signal. More Actions The types of buttons appearing on the vary, depending on the region and the type of connected device. Using Universal Remote Control Automatically Setting the Universal Remote Control When you set up the universal remote control, you can control the peripherals (Blu-...

  • Page 28: Launching Apps Through Quick Access

    You can purchase the Magic Remote separately if it is not provided. Some models may not be supported. When changing settings on a device, make sure it is powered on first. To set up a universal remote control with the latest information, connect to the network and accept the User Agreements.

  • Page 29: Connecting To Simplink (Hdmi-Cec)

    Selecting a number that has already been registered allows deregistering it. When you select a number that has not been registered, items that can be registered will be shown. An item that has been registered to a different number is indicated with a check mark. You can view a brief instruction for this function.

  • Page 30: Shortcuts To Accessibility

    This feature works only with devices with the logo. Check for the SIMPLINK logo on the external device. Use of any product other than those specified may cause problems during operation. ® To use SIMPLINK, you need to use a high-speed HDMI cable with CEC (Consumer ®...

  • Page 31: Connecting An Input Device To Usb

    Connect your keyboard to the USB port. You can enter text with the connected keyboard device. It is not possible to enter text on some screens. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech K360, Logitech K400, Logitech K750 You can change the input language by pressing the language switch key or the right Alt key, And also can change by pressing the Ctrl key and the Space key at same time.

  • Page 32: Enjoy Live Tv

    Controller, Logitech F310, Logitech F710 Connecting Bluetooth Input Devices You can connect and use devices such as a Bluetooth-enabled keyboard, mouse, or a gamepad with your TV. To see the details, click the Settings Devices External Devices Connect Bluetooth Controller User Guide.

  • Page 33: Viewing Guide

    TV Scheduler : You can enter the time and date of a programme to schedule watching or recording it at the set time. To see the details, click the Enjoy Live TV Using TV Scheduler User Guide Recordings : You can check the recordings stored in the storage device and play the recordings.

  • Page 34: Checking Programme Info

    Select each area to access the corresponding feature. You can view information on the programme and broadcaster. You can view information about the programme you are currently watching as well as the focused programme information. Select the button or the title of the desired programme. You can view more information on the programme and perform Watch Record...

  • Page 35: Who.where.what

    appears. You can move the banner's position by pressing the button on the remote control and selecting Change Banner Location. If your remote control does not have a button, press and hold the button. It displays the information about the programme you are watching. Select a programme banner to enter the detailed information pop-up to see the detailed programme information or run additional features related to the banner.
  • Page 36 watching. Information may vary depending on the programme. Some models may not be supported. You must connect to the network and agree to User Agreements before you use it. Entering Who.Where.What? Method 1. Press the Wheel (OK) button on your remote control. Press Who.Where.What? on the programme banner.

  • Page 37: Live Playback

    Pressing the button allows you to share the address of the website containing the information through a text message, QR code, or the LG ThinQ app or send it to a smart device. To use the sharing feature, the smart device must have the latest version of the LG ThinQ app installed on it and must be connected to the TV.
  • Page 38 previously if you go out for a while. Input the USB HDD in the USB port. Press the button on the remote control and select Live Playback. If your remote control does not have a button, press and hold the button.

  • Page 39: Recording

    Some models may not be supported. Recording Using Instant Recording Connect a USB HDD or USB stick to a USB port. It is recommended that you record to a USB HDD. Press the button on the remote control and select Record. If your remote control does not have a button, press and hold the button.

  • Page 40: Using Tv Scheduler

    Because of the content protection technology used, the recorded video cannot be played on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is replaced. Do not remove the USB cable while recording. If you force your TV to power off while recording, the recorded content may not be saved.
  • Page 41 Using the TV Scheduler You can enter the time and date of a programme to schedule watching or recording it at the set time. Press on the remote control to select Live TV and view the live broadcast. Press the button on the remote control and select Scheduler.
  • Page 42 If you want to record a live broadcast, click the Record Watch button. In case of an upcoming programme, click the Scheduled Recording Reminder button. Record Scheduled Recording may not be supported on some models. Scheduled recording does not guarantee exact recording time of the programme because the programme will be record as the information of broadcaster.

  • Page 43: Playing Recorded Tv Programs

    Playing Recorded TV Programs Managing Recordings You can view and play recordings stored on storage devices by using the Recordings app. Live TV by pressing . Press the button on the remote control and select Recordings. If your remote control does not have a button, press and hold the button.

  • Page 44: Watching Internet Channel (Lg Channels)

    You can set features such as Resume and the audio language that can be outputted. A list of recordings is shown below. The configurable items differ depending on model. Watching Internet Channel (LG Channels) Watching Internet Programme You can watch real-time broadcasts through this service over the Internet.

  • Page 45: Teletext

    Press the button on the remote control and select Channels. You can also watch LG Channels by pressing the (Programmes) / buttons on the remote control. You can use the ’Interactive Programme’ service that enables users to conveniently enjoy content related to the current programme without having to switch apps.
  • Page 46 Colour button To select the preceding or following page. Number button Enters the page number to move to. (Programmes) / Button To select the preceding or following page. Some models may not be supported. Special Teletext Function Press the button on the remote control. If your remote control does not have a button, press and hold the button.

  • Page 47: Hbbtv

    Select this menu to display concealed information, such as solutions to riddles or puzzles. Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number.

  • Page 48: Ci Information

    services in addition to traditional digital teletext services, all directly on to the TV in a seamless experience. HbbTV services can be activated in a number of ways, the most popular being pressing the . Users typically explore services with the traditional navigation keys (including the OK button and the ).
  • Page 49 This function enables you to watch some encrypted services (pay services). ● If you remove the CI Module, you cannot watch pay services. ● CI (Common Interface) functions may not be possible depending upon the country ● broadcasting circumstances. When the module is inserted into the CI slot, you can access the module menu. ●...
  • Page 50 Apps and Content Content Search User Guide To see the details, click the You can log in to your LG account. You can manage apps, such as updating or deleting installed apps. Closes the app. To turn off the app from running in the background, press the...
  • Page 51 Content Recommendation You can get content recommendations based on the programme you are watching or TV viewing patterns. If you are watching the TV using a set-top box, you must complete the setup of the universal remote control to use the recommendation feature normally. For more information, see How to Operate TV Using Universal Remote Control User...
  • Page 52 Press the button on the remote control. Launch Search for a variety of content and information using the desired search terms. Enter a search term. Shows recent searches. You can select one from the suggested keywords and proceed to search. You can browse content by genre.
  • Page 53 User Guide for more information on the action. You can log in or out with your LG ThinQ account. Edit Inputs : You can edit the name of the connected device or apply the related settings. Edit home IoT devices...
  • Page 54 Log in to your LG ThinQ account. A list of the registered LG ThinQ devices will appear. If you are in an area where the LG ThinQ app is not in service, LG ThinQ device connection will not be supported.
  • Page 55 Home IoT Devices . You can connect and see devices registered with your LG ThinQ account or IoT devices. Once the device is connected, the card will be changed to a smaller size and appear at the bottom of the device connection list.
  • Page 56 Run the LG ThinQ app installed on your smart device. Follow the instructions from LG ThinQ app to connect your smart device to the TV. When your account information of LG ThinQ is linked to the TV, you can manage...
  • Page 57 View All Simple remote control operation is possible. Select and try using the remote control in full screen. You can share and enjoy the sound, screen, or content on the TV and smart device interactively. Displays a list of apps installed on the TV. Displays a list of devices connected to the TV's external input.
  • Page 58 Near Field Communication (NFC) is a technology that allows you to conveniently send and receive information without any separate settings. By bringing a smart device near the NFC-enabled remote control you can install the LG ThinQ app and connect the device to the TV.
  • Page 59 This feature is available for NFC-enabled smart devices only. Depending on the smart device, the NFC location may be different. For more information, refer to the user manual of the device. Features connected via NFC may differ depending on the smart device. This feature is only available if the remote control has an NFC logo.
  • Page 60 its user guide. If connection fails repeatedly, turn off the TV and the device you want to connect to, then turn them back on and try again. Playing Sound from a Smart Device through the TV’s Speakers Playing Sound from a Smart Device through the TV’s Speakers Connect a smart device to the TV via Bluetooth to play sound from the smart device through the TV’s speakers.
  • Page 61 If you use a USB extension cable, the USB storage device may not be recognised or may not work properly. Please use only USB storage devices formatted with the FAT32, exFAT or NTFS file system provided by Windows OS. It is recommended that you use an external USB HDD with a rated voltage of 5 V or less and a rated current of 500 mA or less.
  • Page 62 Select a device to use from the device list. Select the content to play. You can select a device connected to your TV. Displayed only when music is playing. Press the to access the Play Music screen. Launch Search View Type : Selects a content display mode.
  • Page 63 You can use more features by pressing the button on the remote control while viewing a photo. Shows the previous content. Starts the slide show. Shows the next content. Rotates photos. Enlarges or reduces the photo. 360-degree photos can be viewed in 360 degrees. Using the 360°...
  • Page 64 playing a video. Shows the previous video. Plays or pauses the video. Shows the next video. You can change subtitle settings. Rotates videos. Fast-rewinds the video at higher speeds. You can do the settings related to play on repeat of the video. Fast-forwards the video at higher speeds.
  • Page 65 You can select a song from the Media Player app and play the song. You can use more features by pressing the button on the remote control while playing a song. You can set the random play mode. You can set the repeat play mode. Lyrics are available for music files that provide them.
  • Page 66 Press the button on the remote control to launch Home Dashboard. Run the Remote Enter the IP address, User Name, and Password of the PC you wish to connect to, and select Connect to connect the PC. The screen of the connected PC will be displayed on the TV screen and can be operated with the TV remote control.
  • Page 67 Select the “Turn on media streaming” button in the window that opens. Allow all of the “media streaming options”. Select “OK” to save the settings. Select the connected PC in the Home Dashboard app on the TV, and then select and play the file you want.

  • Page 68: Making The Most Of Smart Tv

    Connect Wireless (Windows 10) Click the Notification Centre icon on the taskbar on the PC screen and select Connect. Select the TV you want to connect to and request the connection. After the connection is established, the TV will display the screen of the connected It is recommended that you always update your device to be connected to your TV to the latest OS version for a reliable connection.

  • Page 69: To Use Magic Explorer

    To Use Magic Explorer To Use Magic Explorer You can run a search conveniently through various apps based on on-screen text or video information. Magic Explorer can be used if the pointer colour of the Magic Remote changes (e.g., to the ). Press and hold the Wheel (OK) button on the image if you are watching a...
  • Page 70 Press the button on the remote control. Select on the screen. You can select a screen layout. Side by Side : You can view two apps on a split-screen. : You can run another app on top of the current screen and view it as a pop-up screen. You can choose which app you wish to run alongside the app that is currently running.

  • Page 71: Making The Most Of Art Gallery

    You can operate the sub-screen. You can select the screen of which to output sound. Change to Side by Side mode. Closes the app. Using Side by Side Mode You can operate the selected screen. The sound of the selected screen is output. Change to mode.

  • Page 72: Surfing The Internet On Tv

    View the built-in images for each theme. You can view the information and image of the focused theme in advance. You can delete a downloaded theme or select the desired theme to play. Closes the app. To turn off the app from running in the background, press the button on the remote control and select Quit App...
  • Page 73 You can refresh the web page you are viewing. You can type in a web address to navigate to a specific website or enter a search term directly. You can view the tabs that are currently open. You can zoom in or out on the screen while browsing the website. Block Ads : You can block ads within the web page you are viewing.
  • Page 74 Media in formats other than JPEG/PNG/GIF may not be played. ● Apps may be forced to shut down if the TV runs out of memory. ● The fonts provided on the TV are used. Depending on the content, characters may look ●...
  • Page 75 LG Electronics headquarters (Korea). The submitted information will only be used to improve the Web Browser performance.

  • Page 76: Connecting A Camera To The Tv

    Select Camera. For a detailed description of the camera’s functions, refer to the device's manual. The camera must be purchased separately. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech C920/C920s/C922 Pro/C922x/C925e/C930c/C930e Depending on the installation status of the TV, the camera may not be mounted on the TV.

  • Page 77: Using Sports Alert

    Using Sports Alert Using Sports Alert Press the button on the remote control. Run the Sports Alert app. You can view the list of teams by league and detailed information. Press to register your preferred team or player. By registering a team or player, you can view live scores and upcoming match schedules.

  • Page 78: Settings

    This service is provided for only select content with contracted partners. Settings Quick Settings To Use Setting Function Quickly Set of light-weight controls quickly and simply such as Picture Mode, Sound Out, Game Optimiser and so on. Press the button on the remote control. Picture Mode You can set You can set...
  • Page 79 You can add/delete the quick setting items or change their order. Wheel (OK) Move to an item that can be set up, press the remote control's button once, Wheel (OK) and then press and hold the button to move to the menu. The configurable items differ depending on model.

  • Page 80: Picture

    Picture Selecting Picture Mode Picture Select Mode Select the picture mode that is best suited to your viewing environment, preferences or video type. Select a picture mode. By adjusting and setting each item in more detail based on the mode, your video is better optimised for its characteristics. The configurable items differ depending on model.
  • Page 81 Provides optimized Cinema Picture quality certified by UHD Alliance, the standard setting body for UHD-related technologies. To auto-switch to FILMMAKER MODE when a signal that can be operated with this mode is entered, set FILMMAKER MODE Auto Start Expert (Bright space, daytime) Expert (Dark space, night) This mode is suitable for movies, etc.
  • Page 82 Depending on the input signal, the available picture modes may be different. When watching online service content, the Picture Mode may be changed to match the content being shown. Expert is an option that allows a picture quality expert to fine-tune the quality of the standard picture.
  • Page 83 The picture may get distorted while zooming in or out. Selecting a different screen size from the original size may cause the image to look different. Depending on the combination of picture format and screen size, the edges may be hidden or shown in black, or both sides of the picture may flicker.
  • Page 84 Saving Energy Saving Step Minimum and set to Depending on your TV model, it might not have the OLED Pixel Brightness setting. Adjust Contrast Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast.
  • Page 85 Turning this option may increase energy consumption. Motion Eye Care Automatically adjusts brightness and reduces image blur based on image data to reduce eyestrain. Turning this option may increase energy consumption. Depending on the input signal or the selected picture mode, the available options may differ.
  • Page 86 Sets the Colour Gamut to Adobe RGB standards. Fine Tune This is used when experts control it by using a test pattern. You can control it by selecting areas of six colours (Red/Green/Blue/Cyan/Magenta/Yellow). For normal images, adjustments may not result in noticeable colour changes. Colour Adjustment Adjusts the Colour and saturation of the picture to make the image more Colourful and lively.
  • Page 87 Signal Level(%) Select screen brightness for color temperature adjustment. Method is set to 10 Points Signal Level(%), you can select brightness using numbers indicating 10 levels. When the Method is set to 22 Points Signal Level(%), you can select the brightness with the 22 levels of brightness.
  • Page 88 Removes small dots that stand out so as to make the image clean. MPEG Noise Reduction Reduces the noise produced during the creation of digital video signals. Smooth Gradation It reduces the phenomenon that the outline of the image is rugged and in a staircase pattern and displays a smoother screen.

  • Page 89: Sound

    Resetting Picture Mode Picture Advanced Settings Reset If you want to reset the image settings to the factory defaults after configuring the image settings, select reset for each image mode. FILMMAKER MODE Auto Start Picture Advanced Settings FILMMAKER MODE Auto Start If set to On, Picture Mode will automatically be changed to...
  • Page 90 Depending on the content you watch, you can enjoy the optimised sound and virtual surround in real time. Standard Optimises the sound for all types of content. Cinema Optimises the sound for cinemas. Clear Voice Clear Voice Pro Boosts voice clarity. Sports Football Cricket...
  • Page 91 For some Bluetooth devices, the device volume can be controlled by selecting from the ● connection list. LG Sound Sync devices will automatically try to connect to the recently used devices ● when you turn the TV on. We recommend that you connect an LG audio device that supports LG Sound Sync, ●...
  • Page 92 For more information on the purchase of WiSA authorized products, check on www.wisaassociation.org. Mobile Device If you install the LG ThinQ app on a smart device and connect it to your TV, you can use the device as a speaker for the TV. Use Wired Speaker...
  • Page 93 Sound Sound Out Use External Speakers with TV Speaker Audio can be played through the multiple devices simultaneously. Bluetooth Device + TV Speaker Both the internal speaker of the TV and the Bluetooth speaker can be used to output the sound at the same time or a surround sound can be used.
  • Page 94 Dolby Atmos is based on the concept of audio objects. Any sound can be mixed as a single audio element, an object, that’s independently placed in three-dimensional space. Your new LG TV has been enabled with the latest Dolby Atmos sound technology. Dolby Atmos is the ultimate sound experience which creates moving audio that flows around you using TV speakers.
  • Page 95 Restores the detailed effect settings for the Standard sound mode to the initial settings. HDMI (eARC/ARC) This setting only applies to the internal speakers of the TV or Sound Mode Share connected devices that support Installation Type Sound Advanced Settings Installation Type This mode optimises the sound based on the TV setup.
  • Page 96 Some models may not be supported. Adjusting AV Synchronization Sound Advanced Settings Match Screen and Sound Adjusts the synchronization of the sound from the speaker that is working. The closer the value is set to 60, the slower the voice output speed will be than the default speed.
  • Page 97 Sync device using a TV remote control. If the auto-power feature of the sound bar that supports LG Sound Sync is set to On, the sound bar will be turned on or off together when the TV is turned on or off.

  • Page 98: Always Ready

    HE-AAC / AAC (Optical) Dolby Digital (HDMI ARC) Dolby Digital / Dolby Digital Plus Dolby TrueHD , HDMI eARC , Dolby Atmos : Some models may not be supported. When connected with HDMI eARC, the output audio type will depend on the audio type supported by the connected device.

  • Page 99: Ai Service

    AI Picture Pro General AI Service AI Picture Pro When set to On, artificial intelligence, which has been trained with LG Electronics’ deep learning techniques, finds the most suitable resolution according to the video type and displays it using vivid, realistic, and rich colours.
  • Page 100 AI Sound AI Sound Pro General AI Service AI Sound AI Sound Pro If set to On, the optimal sound and realistic surround effects are provided per the content based on artificial intelligence. HDMI (eARC/ARC) This setting only applies to the internal speakers of the TV or connected devices that support Sound Mode Share When this feature is set to...
  • Page 101 General AI Service Voice Recognition Help It shows a list of voice commands the TV can perform. Using Voice Recognition Settings General AI Service Voice Recognition Settings You can apply settings for voice recognition features. AI Recommendation General AI Service AI Recommendation You can get content recommendation messages according to your content viewing history and app usage history.

  • Page 102: Game Optimiser

    Reset Usage Data It resets the content view history and the app usage history. If you reset them, it takes some time to receive recommendations for contents again. The configurable items differ depending on model. Game Optimiser Game Optimiser Sets up the features for an immersive experience when you play with a video game console.
  • Page 103 You can adjust the blue light output to rest your eyes while watching the screen. Dark Room Mode You can adjust the brightness of the entire screen to reduce eye strain in a dark environment or when watching for a long time to make the screen easier to watch. Prevent input delay (input lag) Minimize the input delay according to the image signal.
  • Page 104 or game console. Menu Colour Menu colour of Game Optimiser Game Dashboard can be changed. User Guide Move to the User Guide app. Picture Black Stabiliser You can fine-tune dark areas. White Stabiliser You can fine-tune light areas. Adjust Contrast Adjusts the contrast of the bright and dark areas of the picture.

  • Page 105: Oled Care

    Wide Aspect Ratio You can set the screen ratio optimised for the game. Screen Position You can change the position of the screen when you set it to a widescreen ratio. Advanced Picture Settings Move to the Picture Advanced Settings. OLED Care OLED Care General OLED Care...
  • Page 106 Device Self Care It provides multiple features to optimise the TV’s condition. Memory Optimiser Optimise your TV by cleaning up unused apps or unnecessary memory. Screen Self-diagnosis After running a test to verify that the image signal is output normally, you can select whether there is an error with the signal on the screen.

  • Page 107: Family Settings

    Screen Off Screen is turned off and only sound is played. Press any button except the power and the volume buttons to turn the screen back Some models may not be supported. If you use Energy Saving Step function, brightness of your TV will be affected. OLED Panel Care With OLED Panel...

  • Page 108: Programmes

    You can use the TV in the set time period only. Outside of the set time period, you must enter your password to use the TV. Enable the function to On. Start Time Time. Selecting Repeat will activate this feature every day. Select Set.
  • Page 109 General Programmes Programme Tuning (Programme Tuning & Settings) Auto Tuning Automatically tunes the programmes. Select Country where the TV is used. Programme settings change depending on the country you choose. Initiate Auto Tuning. Select programme tuning modes. Set Auto Tuning following screen instructions. If Input Source is not connected properly, programme registration may not work.
  • Page 110 Enter a user-defined end frequency range. Set Satellite Setting You can add/delete/set the satellite you want. This function only works when the programme mode is satellite. Satellite Select your desired Satellite. LNB Frequency Select one value from 9750/10600, 9750/10750, 9750, 10600, 10750, 11300, 5150, MDU1, MDU2, MDU3, MDU4, MDU5.
  • Page 111 Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When Motor is enabled, 22kHz Tone, DiSEqC, Unicable are disabled. If you set satellite to others, you must add a transponder using Transponder Edit. When selecting 22kHz Tone and DiSEqC, you must connect them in the same position as displayed on the OSD.
  • Page 112 Settings) Manual Tuning This function is for manually searching and saving programmes. For digital broadcasting, signal strength and signal quality can be checked. Editing Transponder General Programmes Programme Tuning & Settings Transponder Edit You can add / modify / delete a transponder. This function only works when the programme mode is satellite.
  • Page 113 To Use the Signal Test General Programmes Programme Tuning (Programme Tuning & Settings) Signal Test Shows the MUX and Service information etc. Signal test is only available in Antenna or Cable mode. Some models may not be supported. Edit Programmes You can edit the selected programmes from all the stored programmes or add/delete them to/from the favourite programmes.
  • Page 114 For a model that supports satellite programmemes, you can manage the satellite programmes in Edit Satellite Programmes (Advanced) Edit Favourite Programmes List General Programmes Programme Manager Edit Favourites You can add/delete desired programmes to/from the favourite programmes, change their positions, etc. Select the desired programmes from the all programmes list and press the button to add them to the favourite programmes list.

  • Page 115: Network

    linked to online services delivered over broadband to a connected Smart TV. To see the details, click the Enjoy Live TV HbbTV User Guide. Some models may not be supported. What is CI Information This function enables you to watch some encrypted services (pay services). To see the details, click the Enjoy Live TV CI Information User...
  • Page 116 IP address information. In addition, you can change the IP address and DNS server address you want to connect to by pressing the Edit button. Getting Started with LG For more information on how to connect to the network, see webOS TV Connecting to the Network User Guide...
  • Page 117 When a device you've connected before is turned on, it automatically connects to your TV. To disconnect the existing connection, click Disconnect. It is recommended that you use a product that has been tested for compatibility with LG TVs. Bluetooth Mouse : Logitech M535, Logitech MX Master 2S, Apple Magic Mouse2...
  • Page 118 failures may occur. If the device you selected from Registered Devices does not reconnect, Disconnect and then reconnect the device. It’s differ form devices. For more information on the device you want to connect to, refer to its user guide. Camera You can set access permissions to the camera for each app.
  • Page 119 HDMI Deep Colour If you connect a device that supports HDMI Deep Colour, you can enjoy a clearer image. After connecting the playback device, set HDMI Deep Colour to 4K. If the connected device does not support this function, it may not work properly. When a screen problem occurs, change the HDMI Deep Colour setting to Off.
  • Page 120 RGB 4:4:4 RGB 4:4:4 1) 2) RGB 4:4:4 1) 2) 1) 2) YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:4:4 YCbCr 4:4:4 YCbCr 4:4:4 RGB 4:4:4 RGB 4:4:4 RGB 4:4:4 1) Supported when HDMI Deep Colour is set to 4K.
  • Page 121 Postcode This function is used to set the broadcast location of the TV by entering your postcode. LG Services Country If you don’t set the Automatically, you can select the country manually. You must set the country manually when you are not connected to the network.
  • Page 122 Time & Timer General System Time & Timer You can check the time or configure related settings. Set Automatically The TV time is automatically set to the time of digital broadcasting information sent from the broadcasting station or the time sent from the server. Time Date Time Zone...
  • Page 123 The TV is turned off at the set time. Time : Set the time at which to turn the TV off. ● Timer Repeat None : Set the day of the week. Set the option to to operate the feature ●...
  • Page 124 Enter the numbers “0313” in the master password input window, then press OK. The password will be reset. Managing Your LG Account You can sign up for LG membership and log in with your email address in Account. For more information, see...
  • Page 125 You can check the details by selecting the desired item. If it supports shortcuts, you can launch the app. You can delete notifications. Closes the app. To turn off the app from running in the background, press the button on the remote Quit App control and select If your remote control does not have a...
  • Page 126 General System Additional Settings Pointer Options You can set the pointer speed and size you want while it is on the screen. Tracking Speed Sets the pointer speed. Pointer Size Selects the pointer size. Advertisement General System Additional Settings Advertisement If your TV is connected to the Internet, webOS may use a frequency capping cookie to keep track of the number of times an ad is shown on your TV.
  • Page 127 When set to On, you can get help for the selected items when navigating through the Settings menu. Set ID General System Additional Settings Set ID You can set a number (ID) to manage multiple TVs. This feature is for administrators. It is not recommended for use in a typical home environment.
  • Page 128 Accessibility To Use Audio Guidance General Accessibility Audio Guidance Audio Guidance is set to On, audio guides will be provided in various situations, such as when you change programmes, adjust the volume or change settings and input signals. Speed Adjust the speed of spoken guide. Volume Adjust the volume of spoken guide.
  • Page 129 Changing the Menu to High-Contrast Screen General Accessibility High Contrast When this feature is set to On, it adjusts the background of some of the menus on the screen and font colours to highlight the contrast between the light and dark areas. Greyscale General Accessibility Greyscale Change the colour of the menu on the screen to black and white tone to make its...
  • Page 130 Audio commentary or subtitles are provided for those who are hard of hearing or visually impaired. Normal Selects default Audio. Audio Description For the visually impaired Selects the preferred default Audio combined with Visual Impaired Audio. Spoken Subtitle For the visually impaired, selects the preferred Visual Impaired Audio only. Any Supplementary Audio Displays all supplementary audio.
  • Page 131 Auto Update When it is set to On, updates are automatically made without a separate confirmation procedure except for some important updates. Check for Updates When checking for the latest update version, you can only perform updates if an update file of a later version is available. The TV automatically checks your software version but, if necessary, you can perform a manual check.
  • Page 132 ● LG Remote Service You can get help for troubleshooting through the remote control. LG Remote Service, make sure to contact the LG Electronics Customer Service Center. This function may not be available in some countries or models. Quick Help...
  • Page 133 Learn More About Always Ready What is the difference between Always Ready and the power off? Unlike the power off, you can operate the TV with Hands-free Voice Control, connect Bluetooth, and receive responses from a reserved Home IoT Devices. However, standby power may be consumed more than when the power is turned off.
  • Page 134 The colour of Standby Light differs, depending on whether Hands-free Voice Control is activated or not. If Hands-free Voice Control is enabled, it is displayed in white; if it is not available, it is displayed in red. For more information on Hands-free Voice Control, please refer to How to Operate TV Using TV features with Hands-free Voice Control User Guide...
  • Page 135 Audio Guidance Magic Remote does not appear. Set . (Some models may not be supported.) I cannot turn the TV on with the remote control. Please make sure your TV power plug is correctly connected to the outlet. Replace the batteries in the remote control. (Use alkaline batteries.) Check if there is an obstacle blocking the signal in front of the TV's remote control receiver.
  • Page 136 If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. First of all, perform a General OLED Care Device Self Care Screen Self-diagnosis for check any abnormalities in the TV. If you are using a set-top box, turn it off, and then turn it back on.
  • Page 137 Screen Self-diagnosis first. If it is normal, there may be a problem with the broadcast signal. There is a difference in image quality from those seen at the store. Depending on the type of video provided by the broadcasters, there may be a difference in image quality from those displayed at the store.
  • Page 138 Picture Select Mode Switch Select Mode to your desired picture mode. ( Standard Vivid , etc.) This applies to the current input mode only. Picture Advanced Settings Brightness Motion Eye Care Switch Motion Eye Care . This applies to the current input mode only. General OLED Care Device Self Care...
  • Page 139 First of all, perform a General OLED Care Device Self Care Sound Self-diagnosis for check any abnormalities in the TV. If you are using a set-top box, turn it off, and then turn it back on. Make sure that the set-top box is correctly connected to your TV. The screen is fine, but it does not play any sound.
  • Page 140 The volume keeps changing. Sound Advanced Settings Automatic Volume Adjustment Automatic Volume Adjustment General AI Service AI Sound AI Sound Pro AI Sound AI Sound Pro Switch The sound does not work or only the background music is played in some programmes.
  • Page 141 need an RGB to HDMI gender. You will not see anything on the screen if you use an HDMI to RGB gender. The screen is not fully shown or is lopsided when connected to a PC. Set the PC’s resolution to one supported by the TV. For more information, see Being Aware of the Information Supported Resolution : HDMI-PC User Guide...
  • Page 142 Check that the file extension is supported. Check that the resolution is supported. Check that the video codec is supported. Check that the frame rate is supported. I get a message saying “This audio is not supported” or the video is playing normally but the audio is not.
  • Page 143 Troubleshooting Recording Issues Troubleshooting Recording Issues Refer to Enjoy Live TV Recording in the User Guide for details on recording. How do I start recording? Connect a USB storage device with at least 4 GB of total space. The device must have at least 1 GB of available space.
  • Page 144 Troubleshooting Network Connection Issues Troubleshooting Network Connection Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. Before connecting to a wireless network, check the name and password of the Wi-Fi device to connect.
  • Page 145 Internet provider. If you are still unable to establish your configuration, consult your router’s manufacturer or your Internet service provider. Troubleshooting LG Account Issues Troubleshooting LG Account Issues I’ve signed up for the membership on TV. Do I have to sign up again on the website (www.lgappstv.com)?
  • Page 146 I wish to delete the account saved on the TV. When you log in to your LG account on the TV, the account will be saved to the TV. You can delete accounts stored on the TV at any time, as follows.
  • Page 147 Change to the service country you are going to use the service from in General System Location LG Services Country (Some models may not be supported.) If you cannot see some apps, it may be because you deleted them. Please reinstall the appropriate app.
  • Page 148 If the Use Block Ads feature is turned on, the area on the website that appears to show an ad will appear blank. If some content on the website is hidden and invisible, try setting Settings Use Block Ads Web Browser Sponsored AD on the new tab Use Block Ads...
  • Page 149 Minimum : 64 × 64 Maximum : 1920 (W) × 1080 (H) avif, heic, heif AVIF/HEIF Minimum : 64 × 64 Maximum : 4800 (W) × 3600 (H) 9600 (W) × 7200 (H) (8K models only) Supported Video File Formats Supported Video File Formats Maximum Data Transfer Rate Full HD video...
  • Page 150 Matroska (mkv) : Sub Station Alpha (SSA), Advanced Sub Station Alpha (ASS), SRT MP4 : Timed Text Supported Video Codecs Extension Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/WMA Speech) Video Xvid (GMC is not supported), H.264/AVC, Motion Jpeg, MPEG-4 Audio...
  • Page 151 Estimation (Qpel) are not supported. ULTRA HD video (ULTRA HD models only) : 3840 × 2160, 4096 × 2160 Some HEVC-encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be supported after a software upgrade.
  • Page 152 Supported Music File Formats Supported Music File Formats 　 File Format Info Bit rate 32 kbps ~ 320 kbps Sample freq. 16 kHz ~ 48 kHz Support MPEG-1, MPEG-2 Channels mono, stereo Bit rate Sample freq. 8 kHz ~ 96 kHz Support Channels mono, stereo...
  • Page 153 Sample freq. 8 kHz ~ 48 kHz Support Channels up to 6 ch flac Bit rate Sample freq. 8 kHz ~ 96 kHz Support FLAC Channels mono, stereo The number of supported programmes may vary depending on the sample frequency. Supported Resolution : HDMI-DTV HDMI-DTV Supported Mode Resolution...
  • Page 154 1280 × 720p 37.5 44.95 59.94 1920 × 1080i 28.12 33.71 59.94 33.75 1920 × 1080p 26.97 23.97 28.12 33.71 29.97 33.75 56.25 67.43 59.94 67.5 1920 × 1080p 112.5 (ULTRA HD, 8K models only) 134.86 119.88...
  • Page 155 2560 × 1080p 4) 5) (ULTRA HD, 8K models only) 131.74 3840 × 2160p 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5 134.86 59.94 3840 × 2160p 1) 2) 3) (ULTRA HD, 8K models only) 269.73 119.88 4096 ×...
  • Page 156 67.5 112.5 134.86 59.94 4096 × 2160p 1) 2) 3) (ULTRA HD, 8K models only) 269.73 119.88 7680 × 4320p 107.89 23.97 (8K models only) 131.87 29.97 263.74 59.94...
  • Page 157 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K. 3) (ULTRA HD models only) Only some HDMI input ports are supported. 4) Supported when Wide Aspect Ratio is set to 21:9. 5) Supported when Wide Aspect Ratio is set to 32:9.
  • Page 158 1920 × 1080 134.86 119.88 (ULTRA HD, 8K models only) 4) 5) 2560 × 1080 (ULTRA HD, 8K models only) 131.74 2560 × 1440 182.99 119.99 (ULTRA HD, 8K models only) 3840 × 1080 66.62 (ULTRA HD, 8K models only) 137.25 3840 ×...
  • Page 159 3840 × 2160 (ULTRA HD, 8K models only) 269.73 119.88 4096 × 2160 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5 134.86 59.94 4096 × 2160 (ULTRA HD, 8K models only) 269.73 119.88 7680 × 4320 107.89 23.97 (8K models only)
  • Page 160 131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K. 3) Supported when HDMI Deep Colour is set to Off. 4) Supported when Wide Aspect Ratio is set to 21:9.
  • Page 161 The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners. Quickset...
  • Page 162 Apps on Premium area are arranged in accordance with the yearly app usage (no. of ○ app access) among LG Smart TV users by country. No. of apps may vary from 7 to 20 by each year's platform and the arrangement cannot be customized.
  • Page 163 description, cast, director and etc.) of the programs that the user is watching currently.

This manual is also suitable for:

Oled c2

Table of Contents