Discharging Cuttings; Discarding Cuttings - Canon Perfect Binder-F1 User Manual

Discharging Cuttings

This section explains how to discharge cuttings.

Discarding Cuttings

2
Use the following procedure to remove cuttings from the Trimmer waste unit.
CAUTION

Do not place a plastic bag or other secondary container in the trimmer waste
tray. Doing so reduces the capacity of the trimmer waste tray and does not allow
it to collect enough cuttings. It might also cause a malfunction.

Do not use the trimmer waste unit as storage. Using the stacker as storage
could cause a malfunction.
NOTE
This operation can be performed while the device is operating.
1
2-14

Discharging Cuttings

Pull out the trimmer waste unit.
NOTE
The trimmer waste unit may lock so you cannot open it during binding operations. If
this happens, wait a short time and try again.