Speakers (J L-506) - Kenwood Spectrum 350 Setting Up

Specifications
Receiver (KR- 596)
Stereo separation at 1 kH z (IH F):
40 dB
Power amp section
100 watts per channel minimum Frequency response:
RMS, both channels driven, at 8 30 H z ~ 15 kH z, + 0.5 dB, -3.0 dB
ohms, from 40 H z to 20 kH z, with
AM tuner section
no more than 0.09% total harmonic
distortion (FTC) Tuning frequency range:
530 ~ 1700 kH z
Pre amp section
Signal-to-noise ratio (IH F-A) Usable sensitivity:
Phono: 70 dB 12 mv/(500 mV/m)
CD , Tape, Video: 95 dB
Total harmonic distortion: 0.7%
Input sensitivity/impedance
Phono: 3.5 mV/47 k-ohms Signal-to-noise ratio: 48 dB
CD , Tape, Video: 200 mV/47 k-ohms
Selectivity: 30 dB
Tone controls
General
Bass: + _10 dB at 100 H z
Treble: + _10 dB at 10 kH z Power consumption: 2.3 A
FM tuner section
AC outlet (2 switched): 200 W
Tuning frequency range: 1.6 A max. total
87.5 MH z ~ 108 MH z
D imensions
Useable sensitivity (IH F): W idth: 17-5/16"
13.2 dBf (1.2 mv at 75 ohms) H eight: 7-9/16"
D epth: 11-13/16"
50 dB quieting sensitivity (stereo): W eight (net): 23.1 lb
41.2 dBf (3.2 mv at 75 ohms)
Total harmonic distortion (1 kH z)
Stereo: 0.7%
Mono: 0.6%
Signal-to-noise ratio at 65 dBf (IH F)
Stereo: 68 dB
Mono: 75 dB
Selectivity (IH F+ 400 kH z): 50 dB
40.
Downloaded from: http://www.usersmanualguide.com/
CD player (DP- R896)
Format
Laser: Semiconductor laser
Channel format: 2 channel
D isc rotation speed: 200 ~ 500 rpm
(CLV)
D /A converters: D ual 1 Bit
O versampling digital filter:
8 fs (352.8 kH z)
Performance
Frequency response: 4 H z ~ 20 kH z,
+ 1.0 dB
Signal-to-noise ratio: > 96 dB
D ynamic range: > 94 dB
Total harmonic distortion + noise:
< 0.007% (1 kH z)
Channel separation: > 90 dB (1 kH z)
W ow and flutter: Unmeasurable
O utput level/impedance:
2.0 V/3.3 k-ohms
General
Power consumption:10 W
D imensions
W idth: 17-5/16"
H eight: 5-1/16"
D epth: 15-7/16"
W eight (net): 11 lb
Cassette deck Speakers (JL- 506)
(KX - W 595)
D rivers
Format
W oofer: 10" cone-type
Track system: 4 track, 2 channel Midrange: 3" cone-type
Tweeter: 1" dome-type
Recording system: AC bias
(105 kH z) Power handling: 140 watts
General
H eads
W ell-A: Playback head x 1 D imensions
W ell-B: Record/playback head x 1, W idth: 12-5/8"
Erase head x 1 H eight: 35-7/16"
D epth: 9-1/2"
Performance
W eight (net): 23.1 lbs
W ow and flutter: 0.3% (W RMS)
Fast-wind time: Approx 110 Because Kenwood follows a policy
seconds (C-60 tape) of continuous product improve-
ment, these specifications may be
Frequency response: changed without notice.
N ormal tape: 30 H z ~ 13 kH z, + 3 dB
H igh-bias tape: 30 Hz ~ 13 kHz,+ 3 dB
Signal-to-noise ratio: (3% 3rd
harmonic distortion, high bias tape):
D olby N R O FF: > 57 dB
D olby B N R O N : > 66 dB
H armonic distortion (315 H z,
250 nW b/m, high bias tape): < 1%
Input sensitivity/impedance:
122.8 mV/47 k-ohms
O utput level/impedance:
775 mV/3.3 k-ohms
General
Power consumption: 12 W
D imensions
W idth: 17-5/16"
H eight: 5-1/16"
D epth: 9-13/16"
W eight (net): 8.8 lb
41.