Specifications; Receiver (Kr-596); Cd Player (Dp-R896); Cassette Deck (Kx-W595) - Kenwood SPECTRUM 350 Setting Up

Specifications

Receiver (KR-596)

Stereo separation at 1 kHz (IHF):
40 dB
Power amp section
100 watts per channel minimum Frequency response:
RMS, both channels driven, at 8 30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB
ohms, from 40 Hz to 20 kHz, with
no more than 0.09% total harmonic AM tuner section
distortion (FTC) Tuning frequency range:
530 ~ 1700 kHz
Pre amp section
Signal-to-noise ratio (IHF-A) Usable sensitivity:
Phono: 70 dB 12 mv/(500 mV/m)
CD, Tape, Video: 95 dB
Total harmonic distortion: 0.7%
Input sensitivity/impedance
Phono: 3.5 mV/47 k-ohms Signal-to-noise ratio: 48 dB
CD, Tape, Video: 200 mV/47 k-ohms
Selectivity: 30 dB
Tone controls
Bass: + _10 dB at 100 Hz General
Treble: + _10 dB at 10 kHz Power consumption: 2.3 A
FM tuner section AC outlet (2 switched): 200 W
Tuning frequency range: 1.6 A max. total
87.5 MHz ~ 108 MHz
Dimensions
Useable sensitivity (IHF): Width: 17-5/16"
13.2 dBf (1.2 mv at 75 ohms) Height: 7-9/16"
Depth: 11-13/16"
50 dB quieting sensitivity (stereo): Weight (net): 23.1 lb
41.2 dBf (3.2 mv at 75 ohms)
Total harmonic distortion (1 kHz)
Stereo: 0.7%
Mono: 0.6%
Signal-to-noise ratio at 65 dBf (IHF)
Stereo: 68 dB
Mono: 75 dB
Selectivity (IHF+400 kHz): 50 dB
40.

CD player (DP-R896)

Format
Laser: Semiconductor laser
Channel format: 2 channel
Disc rotation speed: 200 ~ 500 rpm
(CLV)
D/A converters: Dual 1 Bit
Oversampling digital filter:
8 fs (352.8 kHz)
Performance
Frequency response: 4 Hz ~ 20 kHz,
+1.0 dB
Signal-to-noise ratio: >96 dB
Dynamic range: >94 dB
Total harmonic distortion + noise:
<0.007% (1 kHz)
Channel separation: >90 dB (1 kHz)
Wow and flutter: Unmeasurable
Output level/impedance:
2.0 V/3.3 k-ohms
General
Power consumption:10 W
Dimensions
Width: 17-5/16"
Height: 5-1/16"
Depth: 15-7/16"
Weight (net): 11 lb
Cassette deck

Speakers (JL-506)

(KX-W595)
Drivers
Format Woofer: 10" cone-type
Track system: 4 track, 2 channel Midrange: 3" cone-type
Tweeter: 1" dome-type
Recording system: AC bias
(105 kHz) Power handling: 140 watts
Heads General
Well-A: Playback head x 1 Dimensions
Well-B: Record/playback head x 1, Width: 12-5/8"
Erase head x 1 Height: 35-7/16"
Depth: 9-1/2"
Performance Weight (net): 23.1 lbs
Wow and flutter: 0.3% (WRMS)
Fast-wind time: Approx 110 Because Kenwood follows a policy
seconds (C-60 tape) of continuous product improve-
ment, these specifications may be
Frequency response: changed without notice.
Normal tape: 30 Hz ~ 13 kHz, +3 dB
High-bias tape: 30 Hz ~ 13 kHz,+3 dB
Signal-to-noise ratio: (3% 3rd
harmonic distortion, high bias tape):
Dolby NR OFF: >57 dB
Dolby B NR ON: >66 dB
Harmonic distortion (315 Hz,
250 nWb/m, high bias tape): <1%
Input sensitivity/impedance:
122.8 mV/47 k-ohms
Output level/impedance:
775 mV/3.3 k-ohms
General
Power consumption: 12 W
Dimensions
Width: 17-5/16"
Height: 5-1/16"
Depth: 9-13/16"
Weight (net): 8.8 lb
41.