Before Using The Cd Player; Compatible Cds; Handling Cds; Cleaning Cds - Kenwood SPECTRUM 350 Setting Up

Before using the CD player

Please read the following instruc-

Storing CDs

tions carefully to help prevent To protect your CDs, store them in
damage to your CD player and your their cases. Don't leave them in the
CDs. player for a long time.

Compatible CDs

Your CD player plays standard 5"
CDs and 3" CD singles and the
audio portion of CDV discs and
CD-G (CD plus graphics) discs.

Handling CDs

Hold a CD by its edges and center
hole. Don't touch the playing
surface or attach labels or tape to
either side of the CD.

Damaged CDs

To avoid possible damage to your
player, don't attempt to play
cracked or warped CDs.

Cleaning CDs

To clean fingerprints or other dirt
from a CD, gently wipe it with a soft
cotton cloth moving in circles
outward from the center.

Condensation

Condensation of water vapor on
the pickup lens may prevent proper
operation of your CD player. To
eliminate the condensation, leave
the player ON for several hours.
Condensation may occur when:
• You bring the player from a cool
or cold place to a warm or
humid place.
22.
• You operate a heater in the
vicinity of the player.
• There's a big difference between
the player's internal temperature
and the temperature of the
room the player is in.
Before you transport your CD
player
1 Turn the player's power ON.
Don't load any CDs.
2 Wait until 5 seconds after NO
DISC appears on the display.
3 Turn the player's power OFF.

Displaying CD time information

You can view time information for the CD you're playing.
Press the TIME DISP. button to cycle between:
TRACK TIME: Elapsed and remaining time of the
current track.
TOTAL TIME: Elapsed and remaining time of the CD.
EDIT
MODE OPEN/CLOSE
DISC SKIP
MULTIPLE COMPACT DISC PLAYER DP-R896
POWER P.MODE CHECK CLEAR STOP
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
TIME DSP RANDOM REPEAT
ON STANDBY
PLAY/PAUSE
/I I

Loading CDs

1 Press the OPEN/CLOSE button to open the tray.
2 Place a CD in one of the tray's circular wells. While
the tray is open, you can insert a CD in each of the 2
exposed wells.
3 To insert more CDs, press the DISC SKIP button to
rotate the tray. Insert a CD when the tray stops rotat-
ing.
4 When you're done, press the OPEN/CLOSE button
to close the tray.

Changing CDs

During play
1 Press the OPEN/CLOSE button to open the tray.
2 Change CDs in the exposed wells. If you want to put
a CD in an unexposed well, press the DISC SKIP
button to rotate the tray. You can't change the CD
currently playing.
When the player is stopped
1 Press the OPEN/CLOSE button to open the tray.
2 Change CDs in the exposed wells. If necessary, press
the DISC SKIP button to rotate the tray.
23.