Editing The Rhythm Part Of A Style (Drum Setup) - Yamaha DGX-670 Reference Manual

Editing the Rhythm Part of a Style (Drum Setup)

The procedure below applies to step 6 in the Basic Procedure on
you to edit the rhythm part of the current Style, such as changing the drum instruments and make various
settings.
1
From the Basic page, use the [1 ] (Rec Ch) buttons to call up the Rec Channel
window in the lower half section of the display.
2
Hold down the [1 ] (Rhy1) or [2 ] (Rhy2) button to select the desired channel as the
editing target.
If the different drum sounds are assigned to each section of the selected channel, the sounds are set to that of the current section in order to use the Drum
Setup function.
3
Use the Cursor buttons [][] to select 3 Rhythm Clear/Channel Delete/Drum Setup,
and then press one of the [6 ]/[7 ] (Drum Setup) buttons to call up the Drum
Setup window.
4
If necessary, press the STYLE CONTROL [START/STOP] button to start playback of
the rhythm part.
The sounds played back are indicated on the display keyboard, letting you to check the note to edit.
5
Use the [1 ]/[2 ] (Note) buttons to select the note to edit.
You can also select the note by pressing the note on the keyboard.
2
3
page 27. The Drum Setup function allows
5
DGX-670 Reference Manual
3
41