Interface Specifications (Gt03-E) - Panasonic GT32-R User Manual

6.4.4 Interface Specifications (GT03-E)

Interface for connecting PLC/External devices
- COM port
Item
Communication standard
Communication Baud rate (bit/s) 9600, 19200, 38400, 57600, 115200 bps
condition with
Data length (bit) 7, 8
external
Parity
devices
Stop bit (bit)
Transmission distance
(Total length)
Protocol
Connector
Note1) The (+) and (-) terminals are the power supply terminals for driving the main unit.
Note2) Regarding power supply voltage, please pay due consideration to the cable length so that the
applied voltage is within the operation voltage range.
Note3) When tightening the terminal block requires a flat-blade screwdriver with a blade size of 0.4 x 2.5
or special screwdriver (part No.: AFP0806). The tightening torque should be 0.22 to 0.3 Nm.
Applicable wire
Interface for transferring screen data
- USB port
Item
Communication standard
Note1)
Connector shape
Trasmission distance
No. of connected unit with PC 1 unit
Note1) Take care of handling of the connector not to add an excessive static electricity on the metal part
of the connector.
SD memory card slot
Item
Support media
Supported format standard
Note1) Check the usable temperature range of a SD memory card to be used before use.
Note2) The SD access lamp turns on while accessing the SD memory card.
AIG03MQ03DE
AIG03TQ13DE
Conforms to RS232C (Non
insulation type)
None, Odd, Even
1
Max. 15 m
(Baud rate: 19200 bit/s)
-
MEWTOCOL (Protocol for our PLC: FP series)
-
MEWTOCOL7 (Protocol for our PLC: FP7 series)
-
General-purpose serial (PANASONIC dedicated protocol)
-
Other companies' PLC protocols (For the details, refer to the latest
GTWIN HELP.)
Connector terminal base (8-pin)
Size Nominal cross-sectional area
AWG#28 to 16 0.08 to 1.25mm2
USB1.1
TYPE-B
USB MiniB type 5pin (Male)
We recommend SLC SD memory cards and SLC SDHC memory cards.
For details on operation confirmed SD memory card and SDHC
memory card, visit
"https://industrial.panasonic.com/ac/e/fasys/information/sd-
card/index.jsp".
Conforms to SD standard.
(Please download formatting software for SD memory cards from the
SD Association website.)
Specifications
AIG03MQ05DE
AIG03TQ15DE
Conforms to RS422 (Non
insulation type)
Max. 500 m
(Baud rate: 115200 bit/s)
Note1) 2) 3)
Rated temperature
60 C
Specifications
Specifications
6-17