Trademarks Motorola, the Motorola Logo and all other trademarks identified as such herein are trademarks of Motorola Inc. All other product or service names are the property of their respective owners.
Page 4
MTM800 Enhanced Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...
Product Safety and RF Exposure booklet enclosed with each radio (Motorola Publication part number 6866537D37) to ensure compliance with Radio Frequency (RF) energy exposure limits. For a list of Motorola-approved antennas and other accessories, visit the following web site which lists approved accessories for your radio model: http://www.motorola.com/governmentandenterprise...
MTM800 Enhanced Mobile Terminal Installation Manual Product Safety and RF Exposure ADDITIONAL IMPORTANT INFORMATION FOR SERVICING AND INSTALLING THE TERMINAL Only specialized workshops should be contacted for installation, maintenance and repair work. This unit is equipped with protection fuses in the Power and Ignition Sense Cable. Replace...
DOCUMENT HISTORY MTM800 Enhanced Mobile Terminal Installation Manual DOCUMENT HISTORY The following major changes have been implemented in this manual since the previous edition: Edition Description Date 6866539D30-A Initial edition Mar 2007 6866539D30-B Ferrite Clamp included Mar 2007 6866539D30-C Legacy errors corrections...
Page 8
MTM800 Enhanced Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...
Scope of This Manual ..........13 MTM800 Enhanced Manuals and User Guides ....... . 14 Warranty and Service Support.
Page 10
MTM800 Enhanced Mobile Terminal Installation Manual CONTENTS Model Specifications* ........... . 22 Model Descriptions** .
Page 11
UPGRADING THE TERMINAL........85 Upgrade Procedure from MTM800 to MTM800 Enhanced....85 From an MTM800 Dash/Desk Radio to an MTM800 Enhanced Dash/Desk Radio.
Page 12
MTM800 Enhanced Mobile Terminal Installation Manual CONTENTS Equipment Electrical Ratings..........91 Normal Load Conditions .
SCOPE MTM800 Enhanced Mobile Terminal Installation Manual SCOPE Scope of This Manual This manual is intended for use by service technicians familiar with similar types of equipment. It contains information required for the installation of the equipment described and is current as of the printing date.
In instances where the product is covered under a "return for replacement" or "return for repair" warranty, a check of the product should be performed prior to shipping the unit back to Motorola. This is to ensure that the product has been correctly programmed or has not been subjected to damage outside the terms of the warranty.
MTM800 Enhanced Mobile Terminal Installation Manual SCOPE Service Information Europe, Middle East and Africa Region EMEA Systems Support Centre (ESSC) The EMEA Systems Support Centre provides a remote Technical Support Service to help customers resolve technical issues and quickly restore networks and systems. This team of highly skilled professionals is available to customers with current service agreements in place that include the Technical Support Service.
Online at https://emeaonline.motorola.com. EMEA Test Equipment Support Information related to support and service of Motorola Test Equipment is available by calling the Motorola Test Equipment Service Group in Germany at +49 (0) 6128 702179, Telefax +49 (0) 6128 951046, through the Customer Care Organization of Motorola’s local area representation, or via the Internet at...
Aftermarket and Accessory Division (AAD). If no part number is assigned, the part is not normally available from Motorola. If a parts list is not included, this generally means that no user-serviceable parts are available for that kit or assembly.
If a 58212-901-4600 complete Motorola part number is assigned to the part, it is available from Motorola. If no part MOTOROLA DO BRASIL LTDA. number is assigned, the part is not normally Av. Chedid Jafet available from Motorola.
Page 20
MTM800 Enhanced Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...
MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Model Information This manual applies to the following Mobile Terminal Models Type No. Sales Model No. Short Description Model MT512M M80RCS6TZ5AN MTM800 ENH 410-470 MHz, DASH...
MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Installation Manual Model Descriptions** Model Description Dash Mount with Mobile Terminal with Direct Mount Enhanced Control Head, Speaker, Microphone or Handset, Standard User Guide, and Installation Accessories. Desk Mount with Mobile Terminal with Direct Mount Enhanced Control Head, Speaker, Microphone or Handset, Standard User Guide, Installation Accessories and Tray with a Power Supply.
MTM800 Enhanced Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES Accessories-to-Model Chart ACCESSORIES Control Heads Part Number Enhanced Control Head, English Keypad GMWN4298 Enhanced Control Head, Chinese Keypad GMWN4299 Enhanced Control Head, Korean Keypad GMWN4300 Enhanced Control Head, Arabic Keypad...
Page 25
MODEL INFORMATION & ACCESSORIES MTM800 Enhanced Mobile Terminal Installation Manual ACCESSORIES Speaker, 13W GMSN4066 Speaker Extension Cable GMKN4084 Handset Part Number GMUN1006 Telephone-Style Handset HLN7016 Impress GCAI Handset PTT Switches Part Number External PTT with Emergency Footswitch RLN4836 Footswitch with Remote PTT...
Page 26
MTM800 Enhanced Mobile Terminal Installation Manual MODEL INFORMATION & ACCESSORIES ACCESSORIES Installation Part Number External Alarm Relay GKN6272 Accessory Connector Kit GMBN1021 Buzzer Kit GLN7282 Mounting (Transceiver) Part Number Key Lock Mount RLN4779 High Profile Mounting Bracket GLN7317 Low Profile Mounting Bracket...
Only the specified Motorola parts in this manual should be used. Failure to do so could result in non compliance to the Automotive Directive (72/245/EEC, as amended by 95/54/EC).
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION In a vehicle with an airbag, make sure that the mounting location of the mobile terminal, or of any terminal accessory, is not in the deployment path of the air bag. Uninstaling the radio OPTION 1: Before disconnecting the 13.2 V main power supply from...
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual * For more information refer to section “Ignition Sense Cable Installation”. The Ignition Sense Cable allows the terminal to be turned on and off by the vehicle ignition switch. In cases of blown fuses, replace ONLY with those of identical value.
Page 30
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Locate a good vehicle ground point. The vehicle frame provides the best ground. Optimum terminal performance can only be achieved with a very low resistance ground connection. Verify that the connections between the battery negative terminal, vehicle chassis, and engine block have low resistance.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Ignition Sense Cable Installation Table 2 Ignition Sense Cable Number Description Rating HKN9327 Ignition Sense Cable with fuse 4 A Ignition Sense Cable, Length: 3 m 6580283E02 Fuse 4 A for Ignition Sense Cable The HKN9327 Ignition Sense Cable allows the terminal to be turned on and off by the vehicle ignition switch.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Terminal Installation Enhanced Control Head Installation The Enhanced Control Head can be removed from the housing and turned to any position within a 180° radius. This provides multiple mounting options for the terminal. For example, the terminal may be mounted on either side of the vehicle to facilitate the safest and most ergonomically ideal position.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Trunnion Installation Installation Planning The trunnion allows the terminal to be mounted to a variety of surfaces. The trunnion must be securely fixed to the vehicle chassis. Ensure the surface can support the weight of the terminal.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Installation Procedure Select either the transmission hump or an open underneath portion of the dash to mount your terminal (see Figure 7). When mounting the trunnion on the transmission hump, be careful that the transmission housing is not affected.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Dashboard Installation Installing the Radio in an Automotive Dashboard Open out the radio cut-out in the dashboard. Remove the top plastic cover off the radio. Insert the mounting frame into the cut-out and retain it by bending back the relevant fixing tabs, using all 6 where possible, to hold it in place.
Page 36
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Figure 8 Mounting the Radio into the Frame (Shown with Enhanced Control Head) Table 3 Components DIN Mount Kit Item Description Part Number DIN Mount Kit PMLN5094 Demount Tool 8166514A01...
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Remove the Radio from the Frame Remove both rubber side caps from the Enhanced Control Head. Insert the demount tool into the two openings as shown in Figure 9 below. Figure 9 Removing the Radio from the Frame Push the demount tools through the openings in the frame.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Desktop Installation The MTM800 Enhanced may be desktop mounted. The Desktop Station option provides the terminal with the desk microphone, power supply, desk top tray (without speaker) and external loudspeaker. If an outdoor antenna is used a proper grounded Lightning...
Page 39
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Wall Outlet Line Cord with Ground Power Supply Outdoor Antenna Lightning Protector with Quarter-Wave 12 V Desktop Shorting Stub Power Cable Speaker Desk Microphone Antenna Indoor Antenna Cable Antenna Connector BNC Radio in...
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Remote Mount Installation Remote Mount Cable Transceiver Toroid 10-Pin Connector 10-Pin Connector Flex Remote Head Enhanced Remote Mount Enhanced Control Head Data Expansion Head Enhanced Toroid Figure 11 Remote Mount Installation with Remote Head Enhanced/Data Expansion Head Enhanced...
Page 41
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Installing the Remote Mount Enhanced Control Head onto the Remote Mount Trunnion Slide the Remote Mount Enhanced Control Head onto the mounting trunnion until it snaps into place. Tighten the screws at both sides of the trunnion. After a few turns, tilt the control head for an optimum view of the display.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Installing the Remote Mount Enhanced Control Head in a DIN Mount Bracket Slide the Remote Mount Enhanced Control Head onto the DIN Mount Bracket until it snaps into place. Tighten the screws at both sides of the DIN Mount Bracket.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Inserting the Remote Mount Enhanced Control Head with the DIN Mount Bracket into the DIN Frame Insert the mounting frame into the DIN Mount Bracket and retain it by bending back the relevant fixing tabs. Use all 6 tabs, if necessary, to hold it in place.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Adding Extra Connectivity to the Remote Head The Accessories Expansion Cable (PMKN4029/PMKN4056) allows users to have extra connectivity to accessories via the Mobile Microphone Port (MMP) and USB port. Accessories Expansion Cable (PMKN4029/PMKN4056)
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Motorcycle Mount Enhanced Control Head Installation Figure 16 Motorcycle Mount Enhanced Control Head - Front Side The keypad labelling of the control head may vary according to the specific customer/country concerns. Planning Planning is the key to fast, easy radio installation. Before a hole is drilled or a wire is run, inspect the vehicle and determine how and where you intend to mount the antenna, radio, and accessories.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION If an additional GPS antenna or a combined TETRA/GPS antenna is used, the antenna housing carries the GPS receiver. Take care not to cover the antenna housing with metal or other radio wave absorbing material.
Page 47
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Figure 18 Upward Movement Figure 19 Downward Movement...
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Mechanical Parts Figure 20 Motorcycle Mount Enhanced Control Head Mounted in a Trunnion Table 8 Motorcycle Mount Enhanced Control Head - Mechanical Parts List for Installation Item Description Part Number Motorcycle Mount TELCO Cable PMKN4030 2 &...
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Data Expansion Head Enhanced Installation Data Expansion Head Enhanced Radio without Control Head The Data Expansion Head Enhanced can be used without a control head. This configuration allows the use of the radio without any control head, allowing the radio to be powered on via the ignition switch.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Data Expansion Head Enhanced with 3rd Party Control Head The Data Expansion Head Enhanced can be used with a “virtual head” on a PC or a third party control head. This configuration allows the controlling of the radio (Transceiver Box) with a Control Terminal (for example: Personal Computer, Laptop, Console, and so forth).
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Data Box Radio This configuration allows the controlling of the radio (Transceiver Box) via PEI (for example: Personal Computer, Laptop, Console, and so forth) with AT Commands (recommended) or TNP1 protocol from a Control Terminal.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Service The junction box PCB is not repairable. Please order a new junction box as necessary. Connections Connect all accessories to the junction box. Connect the mobile-terminal-to-Junction box cable to the junction box.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION 4 = Connector for programming cable FLN 9636 5 = Connector for accessory connector kit GMBN1021 6 = Connector for adapting a laptop via RS232 cable 7 = TELCO-connector for fist microphone (GMMN4063) or...
Page 55
JUNCTION BOX TERMINAL Connection Plan for the Ignition Sense Cable IGNITION SWITCH IGNITION SENSE CABLE SWITCHED BATTERY VOLTAGE JUNCTION BOX TERMINAL The ignition sense cable HKN9327 allows the MTM800 Enhanced to be turned on and off by the vehicle ignition switch.
Page 56
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION To install the cable, carry out the following steps. Connect the stripped lead of the fuse holder cable only to an ignition switched terminal of the fuse block. Use the supplied terminal or any other suitable terminal.
Radios with Data Expansion Head Enhanced To use a junction box with one of the MTM800 Enhanced mobile terminals fitted with a Data Expansion Head Enhanced, always use the 9-pin RS232 port on the Data Expansion Head Enhanced for PEI instead of the 9-pin RS232 port on the junction box (connector 6).
Page 58
INSTALLATION Standard Radios without Data Expansion Head Enhanced For standard MTM800 Enhanced mobile terminals without a Data Expansion Head Enhanced, the jumper between pins 6 and 15 of the junction box (connector 5) should be removed. Table 9 Jumper on Accessory Connector...
Figure 26 Location of Accessory Connector - Rear Side This section gives a description of the Accessory Connector pin functions. The accessory connections shown are not compatible to some other models of Motorola radios. Check the appropriate accessory or technical manual for further information.
Page 60
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Table 10 20-Pin Accessory Connector Function Description RX_AUDIO This is the received RX signal. Output impedance approximate 600 Ohms; unsymmetrical; Output level = 775mV AUDIO_PA_ENABLE This is a digital input. High level or pin enables the audio PA. Low level disables the audio PA.
MTM800 Enhanced Mobile Terminal Installation Manual Accessory Connection Plan The accessory connections shown are not compatible to some other models of Motorola radios. Check the appropriate accessory or technical manual for further information. Ensure correct position of the accessory connector.
Data Expansion Head Enhanced: a) The 10-pin TELCO connector can be used to connect a customized adapter, for example, for connecting the helmet including microphone/earpiece (non-Motorola accessory) or an external PTT. The customized adapter will be connected via the cable RKN4077.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Table 11 10-Pin TELCO Connector Function Description Analog Ground Analog Ground FLT_A+ This voltage is at battery voltage level and is available as long as the radio is connected to the supply voltage. The maximum current is 300mA. A fuse in the radio prevents further circuit damage in case of shorting this pin to ground.
Page 64
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Table 12 25-Pin subD Connector Function Description Not Connected Not Connected SW_B+ Switched U +/100mA SB9600_BUS- SB9600 BUS- ON_OFF_CONTROL/ This input is intended to switch the terminal into flashing & programming mode. FLASH_MODE When the terminal is switched off and this pin is connected with pin 6 (FLT A+), the terminal switches on and enters flashing &...
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual 9-Pin subD Connector The pin assignment of this 9-pin subD connector will follow the requirements of an RS232 standard interface with RS232 voltage level. The cable (see section “Connecting Cables” on page 69) which has to be used is a standardized serial interface cable which allows to connect a data device with an RS232 Interface such as for example PC, Laptop, Console.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Connector and Pin Assignment of the Enhanced Control Head Flex Pin 12 Cable Front View of the Mobile Microphone Port (MMP) Connector Figure 29 View of the Enhanced Control Head’s Mobile Microphone Port Connector and Flex Cable The keypad labelling of the control head may vary according to the specific customer/country concerns.
Page 67
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual 10-Pin Telco Connector 25-Pi n Back Connector Figure 30 View of the Enhanced Control Head’s rear connectors Table 15 10-Pin Telco Connector Telco Connector Pin Function Description AUDIO + Balanced Audio + (Bidirectional)
Page 68
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Table 16 25-Pin Back Connector Back Connector Function Description Default VBUS_1B GCAI PIN 6: 5V Supply Disabled REAR_D - GCAI PIN 4: USB D -, GPIO_2 Disabled (Shared with the front MMP) REAR_D +...
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Connecting Cables Motorcycle Mount Enhanced Control Head-to-Remote Head Enhanced/Data Expansion Head Enhanced (Motorcycle Mount TELCO Cable) Part Number: PMKN4030 Length: 2.3 m (7.55 feet) Figure 31 Connecting Cable - Motorcycle Mount TELCO Cable...
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Remote Mount Enhanced Control Head/Motorcycle Mount Enhanced Control Head-to-Accessories (Accessories Expansion Cable) Part Number: PMKN4029/PMKN4056 Mobile Microphone Port subD Connector USB Connector Figure 32 Connecting Cable - Accessories Expansion Cable Table 17 Accessories Expansion Cable, Connector Pin Function...
Data Expansion Head Enhanced Radio-to-Data Device This is a standardized RS232 cable (will not be provided by Motorola). Use the 9-pin socket on the front side of the Data Expansion Head Enhanced Radio to connect this cable with the data device.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual Data Expansion Head Enhanced Radio-to-Fist Microphone The GMKN4072 Connecting Cable replaces the existing coiled cord cable of the fist microphone (Motorola P/N: GMMN4063). Operation The crimped wires of the cable have to be connected into the 16-pin Accessory Connector (delivered with speaker GMSN4066) and than plugged into the 20-pin connector on the rear side of the radio.
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION Radio-to-Data Device: Active Data Cable The GMKN1022 Active Data Cable provides a 5-wire RS232 interface (for example, RxD, TxD, CTS, RTS, DTR) between a computer and a mobile radio. The cable has to be connected to the 20-...
90 Centimetres (3 Feet) If you are not sure of the rated power of your radio, contact your Motorola representative or dealer and supply the radio model number found on the radio model label. If you cannot determine the rated power out, then assure 90 cm (3 feet) separation from the body of the vehicle.
The MTM800 Enhanced mobile terminal has the option of a GPS board. If a GPS or combined TETRA/GPS antenna is used, make sure that the antenna has a clear view to the sky and that the antenna base which carries the GPS receiver is not covered with any metallic or radio frequency absorbing material.
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual External Speaker Installation Remove the speaker from the trunnion bracket by loosening the two wing screws. Choose a place to mount the speaker. When mounting the trunnion on the transmission hump, be careful that the transmission housing is not affected.
Page 78
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION...
Page 79
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual...
Page 80
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION...
Page 81
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual...
Page 82
MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION...
Page 83
INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual...
Page 84
MTM800 Enhanced Mobile Terminal Installation Manual THIS PAGE INTENTIONALLY LEFT BLANK...
UPGRADING THE TERMINAL Upgrade Procedure from MTM800 to MTM800 Enhanced Existing users of the MTM800 can upgrade their equipment with the Enhanced Control Head. The different procedures below detail the software upgrade as well as the hardware changes required. From an MTM800 Dash/Desk Radio to an MTM800 Enhanced Dash/Desk Radio Upgrade the software on the transceiver.
MTM800 Enhanced Mobile Terminal Installation Manual UPGRADING THE TERMINAL From an MTM800 Remote Radio to an MTM800 Enhanced Remote Radio Upgrade the software on the transceiver. To use the software upgrade feature on the CPS, choose MR7.4 SW or subsequent (see "Using the MR7.4 or Subsequent Software" on page 88).
UPGRADING THE TERMINAL MTM800 Enhanced Mobile Terminal Installation Manual From an MTM800 Motorcycle Radio to an MTM800 Enhanced Motorcycle Radio Upgrade the software on the transceiver. To use the software upgrade feature on the CPS, choose MR7.4 SW or subsequent (see "Using the MR7.4 or Subsequent Software" on page 88).
Run the CPS, click Tools > Options to open the Options dialog. Set “Default Software Path” to contain the new software archive file. Connect the MTM800 to the computer using a flashing cable. Power up the computer to enter bootstrap mode.
Page 89
UPGRADING THE TERMINAL MTM800 Enhanced Mobile Terminal Installation Manual Power off the MTM800.
Page 90
MTM800 Enhanced Mobile Terminal Installation Manual UPGRADING THE TERMINAL...
PRODUCT SPECIFIC INFORMATION MTM800 Enhanced Mobile Terminal Installation Manual APPENDIX Product Specific Information for Digital Terminals Type MT912M/MT812M/MT712M/MT512M This section gives the Service Personnel an overview about product specific notes. This is necessary to take special precautions to avoid the introduction of hazards when operating, installing, servicing or storing equipment.
Page 92
MTM800 Enhanced Mobile Terminal Installation Manual PRODUCT SPECIFIC INFORMATION Fuse Identification In case of blown fuses during the installation replace ONLY with those of identical value. Never insert ones of different values. Fuse for Power Cable GKN6270/GKN6274: 10 A (Motorola Part Number: 6500139767)