LG CordZero A91 Series Owner's Manual page 21

3
Insert the crevice tool
Mesh Filter and turn it counterclockwise to
b
remove the filter.
4
Wash the Cyclonic Mesh Filter under running
water.
• To avoid odor and the malfunction of the
motor, allow the Cyclonic Mesh Filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
5
Use the combination tool to clean out dust or
foreign objects inside the dust bin.
WARNING
• Never wash the product body with water. Water
could reach the motor and cause electric shock
or fire.
• Do not use the product body to suck up oils or
any liquids, including water.
into the Cyclonic
c
• Do not use the appliance without the Cyclonic
Mesh Filter installed. Doing so could damage the
product.
• Do not insert fingers or sharp objects into the
motor to avoid product damage, personal injury,
or electric shock.
• Do not allow foreign objects to reach the motor
to avoid product damage, explosion or fire.
CAUTION
• Do not apply force or allow impacts to the
Cyclonic Mesh Filter. Doing so could deform the
filter, compromise product performance, or
cause the product to malfunction.
Cleaning the Filters
Clean the pre-filter and exhaust filter regularly and
wash them in running water at least once a month
to maintain the optimum suction power of the
appliance.
• The frequency of cleaning depends on where
and how often you use the product. Clean the
filters more frequently if the appliance is used
regularly or in areas with a lot of dust.
• Filters are consumables. Please purchase more
filters from an authorized service center.
1
Remove the battery from the product body.
2
Rotate the exhaust filter
position to separate it from the product
b
body.
3
Lift out the pre-filter
body.
MAINTENANCE 21
to the unlocked
a
from the product
c