Get Started; Charge The Built-In Battery - Philips 8000 Series User Manual

i
USB-C charging port
j USB-C dongle
8 EN

3 Get started

Charge the built-in
battery
•
In "power on" mode, if the battery
level is less than 10%, a prompt tone
is heard every three minutes and the
backlights of the 8 keys blink red,
until the speaker is charged or turns
off.
•
Connect the supplied USB-C charging
cable to the charging port of the
speaker and the USB wall outlet
(5V 2A).
Input: 5V
Warning!
•
If you are not going to use the speaker for a
long time, turn it off and be sure to unplug its
USB-C charging cable from the power outlet.
•
When charging the speaker in
"power off" mode, the backlights of
all keys blink red three times (once
every second) and then turn off.
After that, the backlight of the
On/Off key turns solid red, and then
turns off when fully charged.
•
When charging the speaker in
"power on" mode, the backlights of
all keys blink red three times (once
every second) and then turn off.
After that, the backlight of the
On/Off key blinks white and red
alternately, and then returns to the
current status when fully charged.
2A