Technical Data - DeWalt DCW604 Original Instructions Manual

PLUNGE ROUTER
DCW600, DCW604
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No‑load speed
Router carriage
Router carriage stroke
Collet Size
Cutter Diameter, max
Weight (without battery pack)
Noise and/or vibration values (triax vector sum) according to EN62841‑2‑17:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
DCW600 DCW604
V 18 18
DC
2 2
Li‑Ion Li‑Ion
rpm 16000– 16000–
25500 25500
1 column 2 columns
mm 55 55
mm 8 8
30 30
kg 1.54 2.40
dB(A) 75 81
dB(A) 86 92
dB(A) 3 3
m/s 2 <2.5 5.0
m/s 2 1.5 1.5
EC-Declaration of Conformity
Machinery Directive
Plunge Router
DCW600, DCW604
WALT declares that these products described under Technical
D
e
Data are in compliance with:
2006/42/EC, EN62841‑1:2015 + AC:2015; EN62841‑2‑17:2017.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
WALT, Richard‑Klinger‑Straße 11,
D
e
65510, Idstein, Germany
08.11.2021
EnGLIsH
WALT at
e
WALT.
e
33