Bosch WAX32M40SG User Manual And Installation Instructions page 50

en Cleaning and servicing
Cleaning the drain pump
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 11 sections
to ensure that you use the appliance
safely.
Requirement: The drain pump is
empty. → Page 48
Because water may remain in the
1.
drain pump, remove the pump cap
carefully.
The filter insert in the pump
‒
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Make sure that the impeller in the
3.
drain pump can be turned.
Insert the pump cap.
4.
50
Screw on the pump cap.
5.
90°
The handle on the pump cap must
be in a vertical position.
Insert the maintenance flap and
6.
lock it into place.
1
Close the maintenance flap.
7.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
gramme after you have emptied the
drain pump.
2
⁠ Drain pro-