Installing the Interface Module
To Verify the Installation
To Verify the Installation
Check that "Ethernet" is available in the Communications menu of
1
the mainframe System Configuration menu.
When you power-up the mainframe, the Logic Analysis System performs the
power-up self-tests. After the self-tests are finished, the screen displays the
System Configuration menu. If the operating system finds an interface
module installed, then Ethernet is available in the Communications menu.
If "Ethernet" is not available in the Communications menu, go to
2
"Verifying the Interface Module Performance" in Chapter 3 of this
manual.
Verifying the Installation
2–4
Ethernet should be
listed here