Copyright - Silvercrest SMZ 260 J1 Operating Instructions Manual

• Ensure that the power cord cannot be damaged by sharp edges
or hot surfaces. The power cord must not get jammed or squashed.
Always remove the power cord from the power socket by the plug,
never pull on the cable itself. Always lay the power cord in such a
way that nobody can stand or trip on it.
• The device must always be disconnected from the mains network if
left unattended, in the event of malfunctions, prior to assembly and
disassembly or cleaning.
Under no circumstances may the motor block (2) be
immersed in water and no liquids must ingress into the
housing of the motor block (2).
• Should liquids ingress into the housing of the motor block (2),
immediately remove the plug from the power socket and contact
the service department (see 'Warranty information' section).
• Never touch the motor block (2), the power cord and the plug
with wet hands.
• Disconnect the mini chopper from the mains network as soon as it
has been used. The device is only de-energised once the plug has
been removed.
DANGER of fire
Do not leave the mini chopper running for longer than 1 minute (CO
time). Wait until it has cooled down.

5. Copyright

All contents of this operating manual are subject to copyright law and are provided to the user solely as a
source of information. Any form of copying or reproduction of data and information without the express
written permission of the author is prohibited. This also concerns commercial use of the content and data.
The text and illustrations correspond to the technical standards at the time of printing. Subject to alterations.
SilverCrest SMZ 260 J1
English - 9