Table of Contents
Advertisement
Menu
Setting
Port C Input
Sets the input connector for the third
screen.
Select from among "12G-SDI 1," "12G-
SDI 2," "3G-SDI," "Display Port,"
"HDMI," "DVI-D."
Notes
When inputting the 4K equivalent
signal to the main or sub screen,
the screen is not displayed even
though the 4K equivalent signal is
input to the third screen.
When the main screen displays in
"3D" or "3D to 2D Convert" for "2D/
3D Select," the third screen is not
displayed even though "Port C
Display" is set to "On."
Clipping Size
The clipping size can be set when
using 2 or 3 screen-display.
HD signal:
Select from "Normal," "4:3," "5:4,"
or "V Full."
4K equivalent signal:
Select from "Normal" or "V Full."
Note
"V Full" is applied to the main/sub
screen of POP1 for 2 screen-display
and to the main screen of POP1 for 3
screen-display.
Sub Screen Position
PIP
Sets the sub screen position for the 2
or 3 screens display (PIP).
POP
Sets the sub screen position for the 2
or 3 screens display (POP).
Pattern Skip
Sets the pattern that is skipped when
changing the displaying pattern by
pressing the PIP/POP button on the
front panel or the Foot Switch while
displaying 2 or 3 screen displays.
Set to "Not Skip" or "Skip" for the PIP1,
PIP2, POP1, or POP2 pattern.
Input/Output Configuration menu
Menu
Setting
Clone Out
Format
Select the signal format for clone out
(SDI signal) from "3840×2160" or
"1920×1080."
Frame Rate
Select the frame rate for clone out (SDI
signal) from "60Hz" or "50Hz."
When "60Hz" is selected, clone out
(SDI signal) is output at 59.94 Hz.
Menu
Setting
Color Space
Select the color gamut from "Auto,"
"BT.709," or "BT.2020."
When "Auto" is selected, the color
gamut changes according to the
resolution set in "Format." When
"3840×2160" is selected, clone out (SDI
signal) is output with the "BT.2020"
setting. When "1920×1080" is selected,
it is output with the "BT.709" setting.
2D/3D Output
Select 2D or 3D output mode.
L/R Priority
Select the first line when 3D (Line by
Line) signals are output.
Set this according to the destination
3D monitor. Wrong settings display
images for left and right eyes
conversely.
Transmission
Select the transmission gamma setting
Gamma
for output.
Port A Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to "Not Skip" or "Skip" for the 12G-
SDI 1, 12G-SDI 2, 3G-SDI, Display Port,
HDMI, DVI-D input connector.
Port B Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT B button.
Set to "Not Skip" or "Skip" for the 12G-
SDI 1, 12G-SDI 2, 3G-SDI, Display Port,
HDMI, DVI-D input connector.
31
2D:
Outputs a 2D image.
3D:
Outputs a 3D (Line by Line) image.
Auto:
Automatically switches the output
mode depending on the display
settings of the monitor. 2D images
are output when "2D/3D Select" is
set to "2D" or "3D to 2D Convert" in
the "3D Setting" menu, and 3D
images are output when setting to
"3D."
L Line First:
Outputs an L image in the first line.
R Line First:
Outputs an R image in the first line.
Note
SDR:
Outputs with "2.2."
HLG:
Outputs with "HLG."
Auto:
Outputs an image according to the
monitor gamma settings of the
main screen. It outputs with HLG
when "Gamma" is set to "HLG" in
the "Color Tone Adjustment" menu,
and outputs with SDR when other
settings are selected.
Advertisement
Table of Contents
