Troubleshooting; Cleaning/Limescale Removal - Silvercrest SULA 45 A1 Operating Instructions Manual

Troubleshooting

The following table will help you to identify and rectify minor malfunctions:
Fault
The buttons do not
light up and no
steam comes out of
the appliance.
The buttons light
up or flash, but no
steam is coming
out of the appli-
ance.
The steam smells.
Only a small
amount of steam is
coming out of the
appliance.
NOTE
► If you cannot solve the problem with the above-mentioned solutions, please con-
tact the Service Hotline (see section Service) .

Cleaning/limescale removal

DANGER
Risk of electrocution!
► Remove the power plug from the mains socket before starting to clean the
appliance.
CAUTION
Possible damage to the appliance!
► To avoid irreparable damage to the appliance, ensure that no moisture can
penetrate the appliance during cleaning.
► Never try to remove limescale with pointed or sharp objects. This could damage
the appliance.
■ 48 │ GB │ MT
Possible cause
The power plug is not con-
nected to the mains socket.
The appliance is not switched
on.
There is no water in the water
tank .
The water in the water tank
has not been changed for
a long time.
The heat converter
descaling.
The water in the water tank
has not been changed for
a long time.
Remedy
Insert the power plug into the
mains socket.
Press the STANDBY button
.
Pour water into the water tank
.
Clean the water tank
pour in fresh water.
needs
Clean the heat converter
Clean the water tank
pour in fresh water.
and
.
and
SULA 45 A1