2 Configuration and Operation
2
Configuration and Operation
2.1
Singular Frequency and Frequency Range
CPE scanner configuration includes a list of possible frequencies that can be a
singular frequency or a range of frequencies. The maximum number of entries in
the list is 32.
Single frequency is defined by setting the Start and the End frequency to the same
value and the number of steps to 0. The following figure illustrates an example of
such a configuration.
Figure 2-1: Single Frequency List Configuration
Frequency Range is defined by setting a start frequency, an end frequency, and a
step. The smallest possible step is 250 Khz. The following figure illustrates an
example of a range configuration.
How to Configure the CPE Scanner
Entry-ID: 103929234,
V 1.0,
10/2014
4