Commissioning; Initial Commissioning - Bosch Rexroth MOBILEX GFT-W 30 Series Operating Instructions Manual

8 Commissioning

Dangers caused by work in the danger zone of a crane/winch application!
Mortal danger, risk of injury or severe physical injury!
Be aware of potential hazards and eliminate such hazards before taking the

planetary gearbox into operation.
Nobody should be in the danger zone of the crane or winch application.

The "Emergency Stop" button for the crane or winch application must be

within reach of the operator.
Strictly observe the instructions of the crane or winch application

manufacturer for commissioning.
Never step or put your hands under suspended loads.

Commissioning an improperly installed product!
Risk of injury and property damage! Improperly installed products may cause
injuries or damages to the product!
Make sure that all electrical or hydraulic connections are connected or sealed.

Only commission a completely installed product.


8.1 Initial commissioning

Before commissioning the planetary gearbox, following documents must be at
hand:
• Dimensioned drawing of the planetary gearbox
• Technical data of the planetary gearbox
Only commission the planetary gearbox if it has been mounted and installed

according to the instructions and information in these operating instructions,
the material number-specific operating instructions and the operating
instructions of the overall crane or winch application.
For all work related commissioning of the planetary gearbox, observe the
general safety instructions and intended use as specified in chapter 2 "Safety
instructions".
RE 79100-01-B/11.2020, MOBILEX GFT-W general operating instructions series 30, Bosch Rexroth AG
WARNING
CAUTION
Commissioning 51/86