Sharp MX-B467F Quick Reference

Quick Reference
Copy
Making copies
1
Load an original document into the ADF tray or on the scanner
glass.
Note: To avoid a cropped image, make sure that the original
document and output have the same paper size.
2 From the home screen, touch Copy, and then specify the
number of copies.
If necessary, adjust the copy settings.
3
Copy the document.
Note: To make a quick copy, from the control panel, press
Copying on both sides of the paper
(two‑sided)
1
Load an original document into the ADF tray or on the scanner
glass.
2 From the home screen, touch Copy > Settings > Paper Setup.
3 Adjust the settings.
4 Copy the document.
Copying multiple pages onto a single
sheet
1 Load an original document into the ADF tray or on the scanner
glass.
2 From the control panel, navigate to:
Copy > Settings > Pages per Side > adjust the settings
3 Copy the document.
Fax
Sending a fax
Using the control panel
1 Load the original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch Fax, and then enter the needed
information.
3
If necessary, configure other fax settings.
4
Send the fax job.
Using the computer
Note: Make sure that the Universal Fax driver is installed.
For Windows users
. 1
With a document open, click File > Print.
2 Select the printer, and then click Properties, Preferences,
Options, or Setup.
3
Click Fax > Enable fax, and then enter the recipient number.
4
If necessary, configure other fax settings.
5
Send the fax job.
For Macintosh users
1
With a document open, choose File > Print.
2
Select the printer and enter the recipient number.
3
If necessary, configure other fax settings.
4
Send the fax job.
1
E-mail
Configuring the e‑mail server settings
You can send scanned documents through e-mail after setting up
the SMTP server. For more information on SMTP settings, contact
your e ‑ mail provider.
Using the control panel
From the home screen, touch Settings > E ‑ mail > E ‑ mail Setup.
1
2
Configure the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in
the address field.
Notes:
•
View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable
it to load the web page correctly.
Click Settings > E ‑ mail.
2
From the E ‑ mail Setup section, configure the settings.
3
4
Click Save.
Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch E-mail, and then enter the
needed information.
Note: You can also enter the recipient using the address
book or shortcut number.
3
If necessary, configure the output file type settings.
4
Send the e-mail.