Table of Contents
Advertisement
M4M 30 NETWORK ANALYZER USER MANUAL
Reset menu
→
→
→
Unit
Type of reset
Description
Restore the device to the factory state except for the audit log. Up to 20
Factory reset
factory resets can be carried out over the product lifetime.
Global reset
Complete reset of the device except for the settings and the audit log
Erase all historical data (Load Profile, Demands, Energy Snapshots and
Historicals reset
Energy Trend).
Avg/Min/Max reset
Reset the average, min and max data.
Erase all energy measurement accumulators. Up to 240 energy resets can
Energy reset
be carried out over the product lifetime.
Notification reset
Erase all notifications (Alarms, Warnings, Errors).
Device Info menu
In this menu it is possible to visualize the main info related to the M4M network analyzer: FW version, FW
CRC, product name and unique serial number.
It is highly recommended to update the firmware to the latest version for security and functionality
reasons. Please check the ABB website and download the latest version of the firmware.
In order to update the FW to the latest version (via Modbus RTU or Modbus TCP/IP) it is necessary to use ABB
Software Ekip Connect 3.
Date/Time menu
During the first commissioning, it is highly recommended to configure the date and time on the network
analyzer (please refer to chapter "6.3.Date and time").
→
→
→
Unit
Reset
Date/Time menu
33
Advertisement
Table of Contents
