66
RECORDING
NexTViewLink Function of this
VTR
If your TV has "Easy Link/nexTViewLink/AV-Link" function, the VTR can automatically store stations memorized in the TV in the
same channel position as those of the TV.
NexTViewLink Function of this VTR
Using a SCART cable (21 pins), a mutual control is available with the TV, VCR, SAT receiver, etc.
•
The VTR automatically stores all your current TV stations in the VTR in the same position order as the TV channels. ("TV CH
DOWNLOAD").
•
Even if the TV is in standby mode, the TV automatically turns on and displays the video picture when you start playback on the
VTR.
•
The VTR automatically selects the same picture as you are watching on the TV, and record it. ("TV PICTURE").
•
The VTR takes in the data and turns to timer standby mode, after a programme data reserved is transferred to the VTR by a TV
using such as a EPG (Electronic Programme Guide). In this case, the TV's and the VTR's channel position must be set to the
same TV station. The position could be stored from 1 to 80. Also the VTR's clock must be set.
Connection
Connect your EasyLink/nexTViewLink/AV-Link TV to the AV1 (EURO AV) socket on the rear of the VTR using the SCART cable,
Refer to your TV's manual additionally.
- Connection to your EasyLink/nexTViewLink/AV-Link TV
TV
AERIAL IN
AUDIO/VIDEO
AERIAL OUTPUT
IN/OUT (SCART) SCART cable
When connecting another VTR supporting EasyLink/nexTViewLink/AV-Link function
The "nexTViewLink system can connect 2 VTRs (VTR1 and VTR2) at the same time. This VTR is adjusted to "VTR1", so it
should be connected to VTR2.
TV
SCART cable
- Connection to your EasyLink/nexTViewLink/AV-Link TV and a satellite receiver
TV
30
AV2(SATELLITE) IN
OUT
R
AUDIO
TV
L
AV1(EURO AV)
VTR
VTR2
VTR1
SCART cable
IN/OUT(SCART)
AV2(SATELLITE) IN
OUT
R
AUDIO
TV
L
AV1(EURO AV)
66
RECORDING
NexTViewLink Function of this
VTR
continued
Preparation :
• Turn on the TV
• Select the video channel or the video input mode on the TV
TV Program Download
Note :
• The available position numbers on the VTR are
1 to 80.
• When the TV's channel position is readjusted,
the VTR automatically makes "TV CH
DOWNLOAD"
ON/
STANDBY
VTR
TV
CH/TRK
1
2
3
4
6
5
TV VOL
7
8
9
I.SELECT
ENTER
0
F. ADV
INDEX
COUNT/ TR
CLR/ RST
MENU /
REC
TIMER
TXT/ TV
5
PLAY
SLOW
PAUSE/STILL
OK
CURSOR
6
REW
F F
STOP
SP/ LP
AUDIO
DISPLAY TV/VIDEO
A.DUB
SAT.MONI.
SAT.CONT.
PROG.
PROG.
1
Press MENU on the remote control.
Result : The programming menu is displayed.
2
Press the corresponding $, ❷!
or ➛, ❿ button to select the
INSTALLATION option.
PROG
OPTIONS
And then Press the OK button
to select this option.
BONUS
CLOCK
Result : The INSTALLATION
INSTALLATION
menu is displayed.
$❷!!➛❿
OK
3
Press the $ or ❷ button to
select NEXTVIEWLINK
SETTING option. And then press
INSTALL
AUTO SET UP
the ❿button to select this option.
MANUAL SET UP
NEXTVIEWLINK SETTING
Result : the NEXTVIEWLINK
SATELLITE SETTING
SETTING menu is
VCR OUTPUT CH
displayed.
$❷!!!!!!❿
4
Press the $ or ❷ button, until
the TV CH DOWNLOAD
** NEXTVIEWLINK **
option is selected.
TV CH DOWNLOAD
And then press the ❿ button to
TV PICTURE RECORD :OFF
select this option.
$❷!!!!!!!❿
Press the ❿ button to start TV CH DOWNLOAD function.
When the downloading finished, then "TV CH DOWNLOAD
FINISHED" is displayed.
TV CH DOWNLOAD
I ---------------- I
START:❿
7
Press the MENU button to exit.
INSTALL
LANG
END:
MENU
:CH36
END:
MENU
END:
MENU
0%
END:
MENU
31