Table of Contents
Advertisement
66
GETTING STARTED
Installation
continued
You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up)
Presetting the stations automatically
Your VTR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the
tuner. This can be done:
• Plug & Auto Set up (see page 11)
• Automatically
• Manually (see page 17)
ON/
STANDBY
VTR
TV
CH/TRK
1
2
3
4
5
6
TV VOL
7
8
9
I.SELECT
ENTER
0
F. ADV
INDEX
COUNT/ TR
CLR/ RST
MENU /
REC
TIMER
TXT/ TV
PLAY
SLOW
PAUSE/STILL
OK
CURSOR
REW
F F
STOP
SP/ LP
AUDIO
DISPLAY TV/VIDEO
NOTE :
The time and date are set automatically from the broadcast
signal. If the signal is weak or ghosting occurs, the time and
date may not be set automatically. In this case, they should be
set manually (see page 13).
Once the auto scanning procedure has finished, some stations
may have been stored more than once; select the stations with
the best reception and delete the ones no longer required (see
page 25).
16
1
Press MENU on the remote control.
Result : The programming menu is displayed.
2
Press the corresponding $, ❷!or ➛, ❿ button to select the
INSTALLATION option.
PROG
OPTIONS
CLOCK
BONUS
INSTALLATION
$❷!!➛❿
OK
3
Press the OK button to select this option.
Result : The INSTALLATION menu is displayed.
4
Press the corresponding $ or ❷ button, until the AUTO SET UP
option is selected. And then press the ❿ button to select this
option.
Result : A message appears, indicating that any channels
already preset on your VTR will be deleted.
YOUR DATA WILL BE LOST
PRESS
MENU
5
Press OK to start the auto scanning.
Result :
The PLEASE WAIT indication flashes on the television screen.
AUTO SET UP
PLEASE WAIT
I˚˚˚˚˚˚˚˚----------I
The first frequency band is scanned and the first
station found is displayed and stored.
The VTR then searches for the second station and so on.
When the automatic scanning procedure has
finished, the VTR switches automatically to programme.
Note : The number of stations automatically stored by the VTR
depends on the number of stations that it has found (reception
conditions, etc).
6
If you wish to cancel the auto scanning before the end, press the MENU
button three times to exit the menu.
66
GETTING STARTED
Installation
You do not need to preset the stations manually if you have already set them automatically.
Presetting the stations manually
INSTALL
VTR
TV
LANG
2
1
END:
MENU
4
5
7
8
I.SELECT
0
F. ADV
INDEX
MENU /
REC
TXT/ TV
SLOW
OK
TO CONTINUE
TO EXIT
REW
SP/ LP
AUDIO
60%
A.DUB
SAT.MONI.
EJECT
END:
MENU
continued
1
Press MENU on the remote control.
Result : The programming menu is displayed.
2
Press the corresponding $, ❷!or ➛, ❿ button to select the
INSTALLATION option.
ON/
STANDBY
CH/TRK
3
3
Press the OK button to select this option.
6
Result : The INSTALLATION menu is displayed.
TV VOL
4
Press the $ or ❷ button, until the MANUAL SET UP option is
9
selected.
ENTER
COUNT/ TR
CLR/ RST
TIMER
PLAY
PAUSE/STILL
5
Press the ❿!button to select this option.
OK
Result : The TV STATION TABLE menu is displayed.
CURSOR
F F
STOP
DISPLAY TV/VIDEO
SAT.CONT.
PROG.
PROG.
6
Press the $ or ❷ button to select a programme number as
required.
7
Press the ❿ button to preset the station.
Result : The MANUAL TUNING menu is displayed.
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
INSTALLATION
$❷!!➛❿
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
NEXTVIEWLINK SETTING
SATELLITE SETTING
VCR OUTPUT CH
:CH36
$❷!!!!!!❿
END:
MENU
** TV STATION TABLE **
PR
CH
NAME
1
004
----
2
3
4
5
$❷!!!❿
SWAPPING:
OK
DELETE:
CLR/RST
MENU
** MANUAL TUNING **
PR
: 1
CH
: 004
MFT
: -
NAME
: ----
$❷!!!➛❿
MEMORY:
OK
END:
MENU
17
Advertisement
Table of Contents
