Filling The Water Tank - Silvercrest SDBSB 3000 A1 Operating Instructions Manual

Filling the water tank

NOTE
Use only tap water or distilled water.
If the mains water in your location is rated as hard, it is recommended that you
mix the mains water with some distilled water. Otherwise, limescale deposits
can adversely affect the appliance functions.
Mix tap water with distilled water as described in the table below:
Ask your local water utility about the water hardness in your area. Do not add
water with any additives (such as starch, perfume, softeners or other chemi-
cals) to the water tank 0. These could damage the appliance as residues can
form in the steam chamber. The residues could contaminate the clothing if they
come out of the steam outlets.
1) Remove the plug from the mains power socket if it is plugged in.
2) Pull the water tank
Fig. 3
3) Fill the water tank
marking with water. Do not fill above the MAX marking in the water tank
(see fig. 4).
SDBSB 3000 A1
Water hardness
very soft/soft
medium
hard
very hard
0
by the handle out of the base station (see fig. 3).
0
through the filler opening
Ratio of distilled water to
tap water
-
1:1
2:1
3:1
9
up to at least the MIN
GB │ IE
0
│
11 ■