Descaling The Soleplate - Silvercrest SDBSB 3000 A1 Operating Instructions Manual

5) Swing the base station slightly back and forth to loosen limescale deposits in
the steam chamber.
6) Empty the water from the steam chamber into the sink.
7) Screw in the steam chamber closure
8) Turn over the base station and push the water tank
station until it clicks audibly into place.
NOTE
► The appliance automatically detects the descaling process. After descaling,
the clean control lamp
is used.

Descaling the soleplate

NOTE
► Limescale deposits can form in the openings of the soleplate
over time. Remove this limescale as soon as the clean control lamp
lights up.
1) Remove the plug from the power socket and ensure that the appliance has
cooled down completely.
2) Use the supplied cleaning brush
openings of the soleplate
Fig. 13
3) Insert the plug into a mains power socket and switch on the appliance. Wait
until the heat-up indicator lamp
4) Hold the steam iron horizontally over a bowl or the sink. Press the steam but-
2
ton
5) Press and hold the On/Off button
appliance. Allow the appliance to cool down completely.
6) Wipe off the soleplate
SDBSB 3000 A1
t
no longer lights up the next time the appliance
8
for about 1 minute to remove limescale residue from the soleplate
8
afterwards with a soft, damp cloth.
7
clockwise.
0
q
to remove the limescale deposits in the
(see fig. 13).
1
goes out.
e
for approx. 2 seconds to switch off the
back into the base
8
of the iron
t
8
.
GB │ IE │
19 ■