Anti-Drip System; Cleaning; Cleaning The Housing And Soleplate - Silvercrest SDBT 2400 A1 Operating Instructions Manual

Anti-drip system

The steam iron has an anti-drip system to prevent water from dripping from the
soleplate
ture is still too low and thus no water vapour can develop.
Note
► When the anti-drip function is active, you will hear a clicking sound, especially
during the heating or cooling phase. This noise is due to the design and
indicates the correct functioning of the anti-drip system.

Cleaning

DANGER! RISK OF ELECTRIC SHOCK!
► Always unplug the appliance before cleaning it.
There is a risk of electric shock!
WARNING!
► Allow the steam iron to cool down before cleaning it. Otherwise, there is risk
of burns!

Cleaning the housing and soleplate

ATTENTION!
► Do not use abrasive, aggressive or chemical cleaning agents. These can
damage the surface and the soleplate
Clean the housing and the soleplate
If necessary, use a mild, non-abrasive cleaning agent.
Allow the steam iron to dry completely before using it again.
SDBT 2400 A1
q
during ironing. This could otherwise happen if the heating tempera-
q
of the steam iron.
q
with a slightly damp soft cloth.
GB │ IE │
17 ■