Vertical Ironing With Steam Blast; Spray Function - Silvercrest SDBT 2400 A1 Operating Instructions Manual

Vertical ironing with steam blast

1) Allow the steam iron to heat up until the heat indicator LED
continuously.
2) Hang the garment to be ironed on a hanger hanging from a heat-resistant surface.
3) Hold the steam iron in a vertical position a few centimetres in front of the garment.
4) Briefly press the steam blast button
5 seconds (see Fig. 7).
Fig. 7
5) Touch the garment lightly with the soleplate
wrinkles.

Spray function

ATTENTION!
► Do not use the spray function on silk garments. This may cause water stains
on the clothing.
Note
► Use the spray function for very dry, heavily creased laundry.
► You can use the spray function when steam ironing and when dry ironing.
1) Allow the steam iron to heat up until the heat indicator LED
continuously.
2) Point the water jet
SDBT 2400 A1
4
1
at the part of the garment you want to moisten.
8
lights up
several times at intervals of approx.
q
and steam it to remove
8
lights up
GB │ IE │
15 ■