Husqvarna 596542901 Manual page 9

STEP 3
ATTACH THE SLOTTED TOOL FREE PLATES (FIG. 1-4)
PARTS NEEDED
F
D
1
D
Place the Sloted Tool Free Plate (D) on
the outside of the Roll Over Protection
System Bar.
G
H
2
top
L-bend
The Sloted Plate must be attached with
the top up, the top is identified by the
L-bend in the plate.
3
F
H
Attach the Sloted Plate to the Roll Over
Protection System Bar with two Square
U-Bolts (G), four Nylock Nuts (F) and
four Flat Washers (H). Hand tighten
only. Repeat on opposite side.
9
TOOLS NEEDED
1/2 in. Socket
Wrench
4
G
Sloted Tool Free Plate attached.