Commissioning - Bosch rexroth BODAS DI4 10 Series Instruction Manual

32/40 BODAS displays | Commissioning
Bosch Rexroth AG, RE 95289-01-B/2021-10-12

8 Commissioning

During all work for commissioning the display, observe the general safety
instructions and intended use detailed in chapter 2 "Safety instructions"
from page 8 on.
▶ When commissioning the display or using the BODAS-service functionality
supported by the device, unforeseeable hazards may occur at the machine.
Before commissioning or using the BODAS-service functionality, it must be
ensured that the vehicle and the hydraulic system are in a safe condition.
The BODAS-service function for flashing of DI4/DI3 or RC control units may
only be used during of machine downtime and servicing.
▶ Commission the machine and check the correct functioning of the display.