Safe Operation And Maintenance - ABB HT576419 Operation Manual

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
2 Safety / 2.6 Safe operation and maintenance

2.6 Safe operation and maintenance

© Copyright 2018 . All rights reserved.
The instructions specified in this section are for the safety of personnel.
Together with the instructions in the Hazards during operation and
maintenance section, they allow the user to safely use the turbocharger.
Work safety and work area safety
WARNING
Risk of falling
There is the risk that someone can fall when working on the turbochar-
ger.
Do not climb on the turbocharger or on parts attached to it or use
u
these as climbing aids.
When working at levels above the head, use climbing aids and work
u
platforms suitable for this purpose.
Observe all general regulations for the prevention of accidents.
u
Do not work on the turbocharger if you are under physical or mental
u
stress.
Work only with suitable tools as well as equipment and working ma-
u
terials that are in perfect condition.
Electric tools must be solidly earthed, and connecting cables may not
u
be damaged.
Keep the workplace clean, clear away loose objects and remove
u
obstacles on the floor.
Keep the floor, equipment and the turbocharger clean.
u
Have oil binding materials ready at hand and keep oil catch pans
u
ready or in position
Eliminate leaks.
u
Keep fire-protection materials and fire-extinguishing equipment
u
ready.
Welding work in the vicinity of the turbocharger
When performing welding work in the vicinity of the turbocharger, al-
u
ways cover the filter silencer to prevent the filter mat from being
damaged.
Keep flammable objects and substances out of the range of flying
u
sparks.
Cover all connections on the turbocharger so that no foreign objects
u
can enter the turbocharger.
Wear personal protective equipment (PPE) for welding operations.
u
HZTL2498_EN Revision C April 2018