Contact Information - ABB HT576419 Operation Manual

Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
1 Preliminary remarks / 1.8 Contact information
1.7.1 Explanation of the rating plate
1.7.2 Positions of the rating plates

1.8 Contact information

© Copyright 2018 . All rights reserved.
The recommended replacement intervals and the corresponding opera-
tional limits are jointly defined with the engine manufacturer. This in-
formation is specific to the system.
Operation above the indicated values n
the recommended replacement intervals. In such cases, we recommend that
you contact the nearest official ABB Turbocharging service station.
n and t normally apply only when running at overload (110%) during
Mmax Mmax
trials on the engine test bed. These limits can also be permitted during op-
eration for special applications. Operation above n
mitted.
Non-observance of the recommended replacement intervals can increase
the risk of unpredictable component failures.
A rating plate is attached to the turbocharger foot, one on the left and
one on the right. On turbochargers with insulation from ABB, at least one
additional rating plate is attached to the insulation of the gas outlet cas-
ing.
Contact information for the official service stations of ABB Turbo Sys-
tems is available online.
Scan the QR code to access our website.
u
ABB Turbo Systems Ltd
Bruggerstrasse 71a
CH-5401 Baden
Switzerland
www.abb.com/turbocharging
HZTL2498_EN
, t can considerably shorten
Bmax Bmax
and t
Mmax Mmax
Revision C
is not per-
April 2018