Table of Contents
Advertisement
2.5
Hardware Assembly
This section details the hardware assembly steps for the BOXER-8256AI. Please read
this section thoroughly before beginning installation and ensure you have all necessary
components ready. A Phillips head screwdriver is required.
2.5.1
Module Access & M.2 M-Key Installation
The Xavier NX module is located under the top heat sink. To access, remove the six
(6) screws securing the heatsink to the chassis, then lift the heatsink off. The module
will be located as shown.
The M.2 M-Key (2280) slot is also located under the top heat sink, adjacent to the
Xavier NX module. Follow standard procedures for expansion card installation, aligning
the notch on the M.2 2280 SSD with the M.2 key slot. Note the location of the
mounting screws.
Chapter 2 – Hardware Information
35
Advertisement
Table of Contents
