Lens Removal; Lens Adjustment; Prism Block And Condenser Lens Removal; Condenser Lens Adjustment - Sony VPL-X600U Service Manual

2-2-12. Lens Removal

2-2-14. Prism Block and Condenser Lens
Removal
• Remove the C board (Refer to 2-2-8.)
Note : Don't touch prism glass and LCD panel,
especially the activities of the Flexible cable.
1 Four screws
5 Screw
(+P 3X8)
(+PSW 3X8)
2 Cover
6 Condenser
Red
lens
3 Screw
(+P 3X8)
4 Prism
block
VPL-X600
1 Four screws
(+PSW 4X12)
2 Lens
Don't touch the activities
of the Flexible cable.
7 Screw (+PSW 3X8)
Green
8 Condenser lens
9 Screw
(+PSW 3X8)
Blue
Pinch
here
0 Condenser
lens

2-2-13. Lens Adjustment

Any projection size is available when it's within
40~100inches extent.
Zoom ring
Screw driver blade (–)
Procedure
(0) Focus Ring = Mid Position
(1) Zoom Ring = Tele End
(2) Adjust focus using Focus Ring
(3) Zoom Ring = Wide End
(4) Adjust focus using Screw Driver
(5) Go to (1)

2-2-15. Condenser Lens Adjustment

Adjust to be darkened.
• 0% Flat Field Input
• CONT = 80, BRT = MIN
Screw driver (–)
Lens
Focus ring
Condenser lens
2-5