ABB MINI-MAG 10D1475 Series Instruction Manual page 20

10D1475 MINI-MAG MAGNETIC FLOWMETER INSTRUCTION MANUAL
Vibration Limit
Integrally Mounted
Remotely Mounted
Materials of Construction
Meter Liner
Electrode Assemblies
Meter Housing
Electronics Housing
Installation Kit
Safety Classification
INTRODUCTION
*5 to 14 Hz, 0.10 inch,
14 to 2000 Hz, 1 g
*
Signal converter must be remotely mounted if
these limits are exceeded.
5 to 14 Hz, 0.20 inch
14 to 2000 Hz, 1.5 g
TEFZEL (ETFE)
Hastelloy-C, Tantalum, Zirconium or Platinum
materials as specified (ref: Application Guide
PMI IV.C.10)
carbon steel, all welded construction, epoxy finish
die cast aluminum, epoxy finish, 316 sst attach-
ment screws, 1/2 in. NPT conduit connections;
gasketed covers
includes 2 gaskets, mounting studs and nuts,
flange adaptor device when required.
Refer to Section 1.2
1-9