Advertisement
Connect the LST-4200A to your Stereo Receiver
Step 5
Step 5
Set the Display Format
Step 6
Step 6
1)
Press "Display Format" until the desired output jacks
is shown in the window, then press "Select".
2)
Press "Display Format" until the desired mode is
shown in the window, then press "Select".
4
Note 1:
You only need to make
one of these connections
either Digital Coaxial or
Digital Optical or
Analog
Note 2:
You are not required to
connect to a Stereo
Receiver in order to
enjoy the LST-4200A.
You can simply connect
the Audio Outputs to
your TV.
See page 16 of the
Owner's Manual
for more details.
Using DVI:
When using the DVI
output, your TV/Display
and LST-4200A talk to
each other and then
the LST-4200A will
make adjustments.
Not all of the Display
Modes may be available.
The LST-4200A will
remove any modes
that are not compatible
with your TV/Display.
Analog TV/Display:
A standard analog TV
can only display 480i
Even though you can
see video on your TV,
the Display Format
must be set to 480i
in order to see Menus.
See page 17 of the
Owner's Manual
for more details.
Advertisement
