Safety instructions
RISK OF ELECTRIC SHOCK!
Connect the appliance only to mains power sockets
►
supplying a mains power voltage of 220 – 240 V ∼,
50/60 Hz .
In the event of operating malfunctions, and before cleaning
►
the appliance, disconnect the plug from the mains power
socket .
To disconnect the power cable, always pull the plug from
►
the socket, do not pull the power cable itself .
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over .
To avoid risks, arrange for defective plugs and/or power
►
cables to be replaced at once by qualified technicians or
our Customer Service Department .
Make sure that the power cable does not become wet or
►
damp during use . Route the cable in such a way that it
cannot be crushed or damaged .
To prevent risks, stop using the appliance immediately if it is
►
damaged .
Disconnect the appliance from the mains power socket before
►
filling it with water, changing accessories or cleaning it .
Use the appliance only in dry indoor areas, not
outdoors .
Never submerse the appliance in water or other liquids!
►
Never aim the steam jet directly at electrical appliances or
►
equipment which contains electrical components, such as
the interior of ovens .
Operate the appliance only with dry hands and never
►
without shoes (i .e . not barefoot) . This will help reduce the
effect of an electric shock in the event of a malfunction .
Never aim the appliance at moisturesensitive objects .
►
SDM 1500 D2
21
■
GB │ MT
│